Abrasive Cloth Segmented Belt For Woodworking / Polish / Metal , P40-P220

Abrasive Cloth Segmented Belt For Woodworking / Polish / Metal , P40-P220

Quick Detail:

WEEM R1128 anti-static, sharp silicon carbide, resin over resin; waterproof polyester segmented wide belts are specifically developed to maximize life and surface finishes on very wide panels and boards.

They feature exceptional dimensional stability. Stocked jumbo width 64” (1600mm), when make sanding belt size at 104” x 125” (2650 x 3200mm) only with 2 joints.

Specifications:

Description:

WEEM R1128 segment belts are designed as sectional belt, or segmented belt for very wide panels and boards sanding. Therefore we chose the right backing to sustain cross-direction strength for exceptional dimensional stability request. We careful chose YY weight polyester with anti-static treatment for backing. This is a waterproof cloth backing provided both stiffness strength and tensile strength, with treatment for oversized dimensional width stability. All make it an idea backing for sectional belt requirement. Anti-static treatment made on backing to delay or prevent loading problem.

Only premium silicon carbide is selected. Silicon carbide is a very hard and crystal structure produces a fine straight edged grind lines. It is superior for its ability to penetrate with light cutting pressures. SiC is primarily used for grinding nonferrous materials such as brass, copper, bronze, and wood, glass, rubber and plastics. It is also used to finish polyurethanes, primers, lacquers and sealers. And use closed coated technique bond on the backing to ensure the grinding and durable needs. A closed coat product has a higher number of abrasive cutting points per square inch and results in higher stock removal rate and longer time before the abrasive wears out. Normally results in a better finish.

A sectional belt or segmented belt is custom make to your ordered. For panel industrial, the belt size can be 1950mm x 2800mm or 2950mm x 3200mm etc.

A strong bi-direction tape splice is used. Joint of WEEM R1128 segmented belt offer 2 types of joints 

Tap on gain line joint:  as default.

Tap on butt line joint:

Applications:

Woodworking /MDF/HDF/OSD/Partial board/Chip board/Glass/metal

Competitive Advantage:

It is made for wide belt sander, such as: Steinemann, Imeas, Sofuma etc. it offer great performance and durable with heavy duty grinding and sanding needs.