Multi-Functional Panel Processing Machine

Feature

1.        Forming 2 gypsum boards onceper mold device.

2.        Cycle the production with morepanel molds equipped according to the production amount, Which Greatly improvedthe production speed and working efficiency of the wall panels.

3.        Pulling the core tube outautomatically delayed, to avoid of unstable phenomenon caused by human factors,and ensure the product in stable quality consistently.

Advantages

1.        The gypsum panel formingmachine and the multilayer composite gypsum panel machine combine the advantageof the equivalent products and refer to the advanced technology of othercountries gypsum panel production equipment. It solves the problem of the highvolume weight, low strength and poor waterproof of the similar products.The performancehas reached the advanced level in the world.

2.        This equipment is the high-techpatent machine and four or more pieces can be formed at one time. The rawmaterial is measured automatically.

3.        The machine is multifunctional.Wall panels with different size of 60mm, 90mm, 120mm, 150mm and 180 mm areavailable.

4.        The hydraulic opening mold isused to complete the tube turning, passing and drawing synchronously. The coretube can be washed automatically.

5.        The overall production lineoccupies small space with easy operation and high production efficience. Thedaily capacity of 300-900m² and the annual capacity of 100000~300000m².

6.        Materials with high-qualityused, Which makes us products in good flatness and with adjustable length.Almost Zero error, stable and durable.

7.        The company provides theTechnology formula of water-resistant gypsum board freely, also provides serialservices to Customers to guarantee the qualified products .

Production Procedure

1.        Transferring proper proportionof raw materials to stirring machine through transferring belt. (Mechanical);

2.        Mixed in balance by stirringmachine(Mechanical);

3.        Injecting the materialsautomatically (Mechanical);

4.        Binding (Manual);

5.        Drawing the tube outautomatically(Mechanical);

6.        Off line the products forstacking;

7.        Installation.