Insulating Glass Desiccant

Insulating Glass Desiccant

Insulating glass is a kind of energy-saving, heat insulation, sound insulation glass product invented by an American in 1865, main materials are aluminum spacing bar, glass, corner bolt, butyl rubber, polysulfide rubber and desiccant. Its structure is to use two or three pieces of glass through the sealant evenly assembled on aluminum alloy frame which loads desiccant, the middle of the glass filled with dry air or inert gas. Insulating glass is different to double-layer glass, the former should be strictly sealed, but the latter does not need.

Yuanying Insulating Glass Desiccant has the incomparable advantages:

1) Its moisture content is low. Yuanying moisture in packing is controlled within 1%, far below the average level 1.5% of this industry.

2) Depth absorption ability is strong, can fully absorb moisture in insulating glass, ensuring low dew point of insulating glass.

3) Insulating glass desiccant almost doesn’t adsorb O2, N2 and inert gases, so it can ensure that insulating glass doesn’t occur introflexion and excurvature, prolong the service life of insulating glass.

4) Good strength, no cracking; less dust, not falling powder.

5) Non-corrosive effect to aluminum alloy frame and sealing strip.

6) Insulating glass desiccant can adsorb volatile organic solutes in glass interlayer.

7) The initial static water adsorption speed is slow.

8) Large temperature rise, releasing small amount of gas.