Water Induced Draft Cooling Tower , 109000 M3/H Airflow Cooling Towers

Delivery Time:4 weeks

Water Induced Draft Cooling Tower , 109000 M3/H Airflow Cooling Towers

Quick Detail:

The two end walls are made of concrete. The louver is made of PVC and functions as guiding the water and air. The filling is installed at an angle that way can avoid the damage on peripheral filling caused by intensive water lash. The design of layout of columns and beams in the tower has fully taken into consideration not only the strength and reliability of the structure but also the uniform distribution of water and low resistance of air.

The performance and thermal efficiency of this type of crossflow cooling tower have been proven by the detailed calculation of resistance and thermal performance as well as the many actual project experience.

Specifications:

Model	Waterflow per cell (m3/h)	Dimension	Mechnical equipment
L(mm)	W(mm)	H(mm)	Fan Dia. (mm)	Airflow(m3/h)	Motor(KW)
CRSC-1500	1500	10600	11636	9880	7000	109000	75
Design condition: The inlet temp. and outlet. Temp. is 43℃ and 33 ℃; The WBT is 28℃; SS is less than 50 ppm.

Description:

CRSC series crossflow cooling tower comes from the many years of KWELL’S experience in design and manufacture. It is a technically advanced crossflow cooling tower with reliable performance which has pass or even surpass the requirement of GB 7190-2008. This type of cooling tower is widely used for circulating water in various industries such as: chemical, metallurgical, power, pharmaceutical etc.

Applications:

This type cooling tower could be widely used in the recycling water system in such fields as Metallurgy, Electric, Chemical and Machinery industry and so on.

Competitive Advantage:

Non-metalizing of the components Streamlining of air-flow field Low energy-consumption of operation Super low loss of drift High-qualified draught device