Alloy Recarbonizer C-Fe Briquette/Carbon Ferro Briquette Used in Carbon Steel Making
Introduction:
1, C-Fe Ball is a new alloy recarbonizer we have developed, we mix iron and high quality recarburant and rolled them from pressure.
2, It is used for common carbon steel, medium carbon steel and high-carbon steel.
Advantages:
1, It has been proved by many steel factories that compared with the traditional recarbonizer, it has better effect of carbon increasing in the molten steel.
2, It is heavier in specific gravity, can enter into the molten steel directly, reduce its floatage and consumption, the recovery rate of carbon is more than 85%.
3, It is easy to operate, small dust pollution while using, avoid the disadvantage of slag overflowing caused by reaction with high oxide slag.
Specification:
|
Composition(%)
Brand |
C |
S |
P |
Fe |
Density(g/cm2) |
Granule(mm) |
Moisture |
|
C-Fe Ball |
20 |
≤0.20 |
≤0.25 |
Balance |
3.5 |
20-60 |
≤0.5 |
|
30 |
≤0.20 |
≤0.25 |
Balance |
3.3 |
20-60 |
≤0.5 |
|
|
40 |
≤0.20 |
≤0.25 |
Balance |
3.0 |
20-60 |
≤0.5 |
|
|
50 |
≤0.20 |
≤0.25 |
Balance |
2.8 |
20-60 |
≤0.5 |
Certification:
1) ISO Approval
2) Certified as "Qualified &Reliable" manufacturer by CIQ
3) Mill's test report as each 1MT p.p bag by CIQ
Send Inquiry to This Supplier
You May Also Like
-
Perforated Metal Antiskid Plate With Non-slip Round Hole Pattern, Tread Stainless Steel Perforated Sheets for Modern StairsUS$ 20 - 100MOQ: 1 Piece
-
Carbon Fiber Used for the Sewage and Water TreatmentNegotiableMOQ: 10 Kilograms
-
Hollow Grouting Anchor Bolt 32mm High Strength for Tunnel Support EngineeringNegotiableMOQ: 1 Meter
-
Brass Coated Steel Cord for Making Tyre 2*0.30mm Belt/ Steel Conveyor Belt Steel Cord /Tear-Resistant Dipped Steel Cord Fabric for Conveyor BeltUS$ 1 - 200MOQ: 10 Kilometers
-
Black Metal & ProductsNegotiableMOQ: 2500 Tons
-
Wodon Chromium Carbide Hardened Wear Components With Super Wear ResistanceCHF 300 - 300MOQ: 1 Square Meter
-
Low Price Q195 Q235 A36 Carbon Steel Wire Annealed WireUS$ 400 - 1000MOQ: 1 Ton
-
Aluminium Foil /Lamination FoilUS$ 2,900 - 3,600MOQ: 20 Tons
-
GrilleNegotiableMOQ: 50 Pieces
-
Tungsten Heavy AlloyUS$ 1 - 1,000MOQ: 5 Kilograms