Two-Wire Loop Isolated Dc Dc Converter, 2-5w / 6-12w / 13-20w Output 1kv Isolation Dc To Dc Converte

Two-Wire Loop Isolated Dc Dc Converter, 2-5w / 6-12w / 13-20w Output 1kv Isolation Dc To Dc Converter

Features:

● Low cost, small size.

● high power density.

● high galvantic isolation.

● no heat sink required.

● Regulated single/dual output.

● Fixed input.

● 1KV isolation.

● Rated 2-5W,6-12W,13-20W output

● industrial standard pin-out

● PCB Mounting

● over current/short circuit protection

Applications:

● Isolation & power supply for analogue electric circuit ( transmitter & sensors).

● Power supply isolation & transfer for safety monitoring and smart building system.

● Safety isolation in ground loop interference control, medical equipments and instruments, etc

● Car electric circuit power isolation & distribution.

● Battery power supply, voltage transfer, power distribution.

●PLC, DCS,PC isolation regulated power supply.

Specifications:

Input

5, 12, 15V,24 VDC

Output

3.3, 5, 9, 12, 15 ,18V, 24 VDC

Characteristic:

@ TA=25° C, Nominal input voltage, rated output current measured

Input

Range 10 %

Filtering Ceramic capacitors

Isolation

Rated Volt 1000 VDC

Leak Current 1 mA

Impedance 109 Ohm

Capacity 60 pF type.

Output

Accuracy 5 %, max.

( 20 MHz BW) Ripple 50 mV p-p, max.

Short Circuit tolerate (<1s)

Linear Voltage Calibration 1,2 % / 1,0 % of Vin

Load voltage calibration 8 %, load = 20 ~ 100 %

Temperature Efficiency 0,02 % / °C

General

Efficiency 60 % to 85 %

Switch Rate 100 KHz, type.

Environments

Working temperature - 40° C to + 85° C

Storage temperature - 55 °C to + 125 °C

Temperature characteristic curve, see Figure

Humidity ≤ 90 %, none condense

Cooling Air

Dimension

SIP 19.60 x 6.00 x 10.00 mm

    0.77 x 0.23 x 0.39inch

Weight : 2 g~3 g

FAQ:

1. When was Sunyuan established? How long has it been in this industry?

Answer: Sunyuan was established on Year 2002 by our General Manager Yu Guang Yuan.we have been in this industry for ten years. All our products are R&D by our technical team and win more than 10 patents. In year 2011 was rated National High and New Technology Company.

2. What qualification do you have?

Answer: According to the different markets\' demands, Sunyuan has got the CE certificate; the product materials meet the ROHS requirements. And have approved ISO9001:2008 International Quality Certification in 2012

3. What’s your MOQ? Whether can get samples?

Answer: NO MOQ limit for EXW.

       Samples are available; some parts can provide free samples.

4. What’s the lead time?

Answer: 3-5 days.

5. What’s the guarantee?

Answer: Five years. And within two years, any quality problem can provide maintain and replace.

6. Any Foreign distributors?

Answer: Sunyuan has distributors located in US, France, Brazil and India.