MMF 125um 850nm Oxide VCSEL SFP Transceiver Module Duplex LC Connector

MMF 125um 850nm Oxide VCSEL SFP Transceiver Module Duplex LC connector

SFP
1. Supplier of SFP
2. fast delivery
3. Best price
4. MM SFP
 

We Supply SFP Transceiver Module

Features 

•  Up to 2.5 Gb/s bi-directional data links

•  Hot-pluggable SFP footprint                            

•  850nm Oxide VCSEL laser transmitter

•  Duplex LC connector

•  RoHS Compliant and Lead-Free

•  Up to 500m on 50/125um MMF,300m on 62.5/125um MMF

•  Metal enclosure, for lower EMI

•  Commercial operating temperature range: 0°C to 70°C

Applications

Ethernet

Fibre Channel

Notes:

1. Connected directly to TX data input pins. AC coupling from pins into laser driver IC.

2. We recommend <600mV for best EMI performance.

3. Or open circuit.

4. Into 100 ohms differential termination.

5. 20 – 80 %

6. LOS is an open collector output. Should be pulled up with 4.7k – 10k ohms on the host board. Normal operation is logic 0; loss of signal is logic 1. Maximum pull-up voltage is 5.5V.

7. Receiver sensitivity is compliant with power supply sinusoidal modulation of 20 Hz to 1.5 MHz up to specified value applied through the recommended power supply filtering network.

8. Typical peak-to-peak jitter (=6*RMS width of Jitter).

9. Measured with DJ-free data input signal. In actual application, output DJ will be the sum of input DJ and Δ DJ.