Home > Products > Lead Free Reflow Oven > LED machine Lead Free Reflow Oven
LED machine Lead Free Reflow Oven
Negotiable
/ Case
1 Case(Min.Order)
- 10 Case / Cases per Month
- T/T L/C D/P D/A
- 7 days
You May Like
Product Details
| Brand Name | ETA | Place of Origin | China | |
| Model Number | E8 |
Product Description
ETA Lead-free reflow oven E8
Heating System
> Eight groups of top and bottom forced hot air convection heating zones.
> Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air convection.
> Independent temperature control in each zone to ensure temperature uniformity within the process tunnel.
> Power consumption savings of 1/3 as compared to other systems.
> Patented motorized blower in each zone is designed to ensure stable air pressure, withstand high process temperature and is disturbance-free.
> Audible and light tower alarm for temperature limits, PCB drop, PCB jam and blower malfunction.
> Fast start-up (within 20 minutes) from room temperature to work temperature due to the high efficiency of the motorized heating plates.
Cooling System
> Two (2) groups of forced air convection cooling zones.
Distortion-free Conveyor System with Automated Chain Lubrication
> Combined pin chain rail and mesh belt conveyor system (Note: Mesh belt is not available on machines with center board support.)
> Closed-loop computer control of the conveyor provides a precise and repeatable reflow process.
> Automated chain lubrication system with a computer controlled central reservoir. Lubricant is added directly to the conveyor brush eliminating operator interface for this maintenance.
Fresh Air Recharge System
> Fresh air is supplied to each zone uniformly to provide a rapid process transfer.
Flux Management System
> Air amplifier forces supercharged flux collection and recirculation.
> Flux exhaust chimney with drawer shaped filter net is easy to access for maintenance.
Control System
> PC control system with windows based control software.
Additional Features
> Integrated UPS will be automatically activated in case of main power failure and will keep control PC and conveyor running for minimum 8 minutes to send out PCBs inside the oven tunnel.
> Motorized hood lift allows easy access to the inside of the oven for service and maintenance.
> Five (5) profiling ports and integrated profiling software are designed for convenient temperature profiling.
> Swing arm control PC station
> Four (4) emergency stop switches
> Two (2) exhaust ports
> SMEMA interface
> System documentation
Specifications : E8(8-Zone)
General
Outside Dimension(L*W*H) : 4800x1250x1490mm
Standard Color : Computer Grey
Weight : Approx.2250KG
Number Of Heating Zones : Up8/Bottom8
Length Of Heating Zones : 2900mm
Exhaust Volume : 10M3/minx2 Exhausts
Standard Feature Of Control System
Electric Supply Required : 3phase,380V 50/60Hz
Power For Warm Up 30KW
Power Consumption 8KW
Warming Time : Approx.20 minute
Temp. Setting Range : Room Temp. --- 300℃
Temperature Control Method : PID Close Loop Control + SSR Driving
Temperature Control Precision : ± 1.0℃
Temperature Deviation on PCB : ± 1.5℃ (by MR Board Test Standard)
Heating Element : Especial Heating elements For Long Life ;
Commutated Element : Aluminium Alloy Plate
Max. Temp. Gap Between Preheat & Reflow Setting : 80℃
Max. Temp. Gap Between Preheat Zones Setting : 40℃
Max. Temp. Gap Between Reflow Zones Setting : 50℃
Data Storage : Process Data and Status Storage
Abnormal Alarm : Abnormal Temperature (Extra-high / Extra-low Temp.)
Board Dropped Alarm : Tower Light: Yellow–Warming; Green-Normal; Red-Abnormal
Features Of Conveyor System
Rail Number : 1 Lane
Max.Width Of PCB : 320mm (Option:610mm )
Components Clearance : Top/ Bottom Clearance of PCB is 25mm
Converyor Direction : L→R (Option: R→L)
Fixed Rail Side : Front Rail Fixed(Option:Rear Rail Fixed)
Transmission Agent : Air-Reflow = Chain + Mesh , N2-Reflow=Chain(Mesh is option)
Center Support (Option) : Preventing PCB warp such too wide and heavy component load
Converyor Height : 90020mm
Converyor Speed Range : 300~2000mm/min
Lubrication Auto-Afflux : Standard
Temp. Thermocouple Slot : Standard
Driven Top Hood Opening : Standard
On Line Editing : Standard
Cooling Method : Forced-Air (Standard), Water-Chiller (Option)
Model for Nitrogen Process
Power For Warm : Up 32KW
Power Consumption : 12KW
Flux Management System : Flux Reclaimed and Filtration standard for N2Oven, easy clean-up.
N2 containment at Entry and Exit End Standard
Flux Reclaim System : Standard
Nitrogen Flow Meter : Standard
Oxygen Analyser : Option
Nitrogen Consumption [Standard] : 400~1000PPM 20M3/H
Water Chiller : 3 HP ; External Stand-alone Type ; Powerful Cooling suit to Lead-Free Process Required
Skype:wangningsmt ,
Contact Us
- Shenzhen ETA Electronic Equipment.,LTD.
- Contact nameHellen Wong Chat Now
- Phone86-755-27428080
- Address, Xianyang, Shaanxi
Product Categories
New Products
-
smt mounter samsung mounter SM421
-
smt shooter CP45FVNEO-chip-mounter
-
Panasonic chip mounter
-
smt semi-automatic printer screen printer
-
smt turnkey solution ETA Lead-free reflow oven E8
-
Samsung chip mounter
-
juki chip mounter
-
yamaha chip mounter
-
AOI
-
lead-free reflow soldering wave soldering
-
lead-free reflow oven Lead-free reflow oven,reflow soldering ETA A500
-
wave soldering machine C-350
Popular Searches
Recommended Products
- Titanium plating equipment for stainless steel products Multi arc ion coating machine
- Used PVD coating equipment Used multi arc ion coating machine
- Evaporative coating equipment Aluminum evaporation equipment
- Vacuum coating equipment electron-beam evaporative coating machine
- Vacuum coating equipment decorative PVD coating ZY-1913
- Vacuum coating equipment decorative PVD coating machine
- Vacuum coating equipment PVD coating machine 1195
- Vacuum coating equipment DLC coating machine ZY-801
- Vacuum coating equipment classic version coating machine ZY-609
- Vacuum coating equipment plus version coating machine ZY-607
- Vacuum coating equipment standard version coating machine ZY-606
- Vacuum coating equipment Magnetron Sputtering Coating Machine ZY-PVD1913ZS
Find Similar Products By Category
- Manufacturing & Processing Machinery > Metallic Processing Machinery > Metal Electroplating Machine
- Please Enter your Email Address
- Please enter the content for your inquiry.
We will find the most reliable suppliers for you according to your description.
Send Now
Shenzhen ETA Electronic Equipment.,LTD.
AIBot OnlineThis conversation is AI-generated. Contact manufacturer before transaction to confirm info.
-
Hellen Wong
Welcome to my shop, I'm glad to serve you. Please feel free to send me any questions you may have.
Your message has exceeded the limit.
- Contact supplier for lowest price
- Customized Request
- Request Sample
- Request Free Catalogs
Your message has exceeded the limit.
-
Purchase Quantity
-
*Sourcing Details
Your inquiry content must be between 10 to 5000 characters.
-
*Email
Please enter Your valid email address.
-
Mobile