5.5KW H Beam Horizontal Welding Line, Beam Welding Line for H-profile Steel

This welding line for H-profile steel is a new technical product that integrates mechanical, electric, and pneumatic technologies. The machine, using advanced technology of single-arc double-wire welding, greatly increases the product efficiency. It consists of welding machine, position fixing machine and conveyer.

After fixing the position for the web and two wings of H-profile steel, the welding machine can automatically located, clamp, adjust, weld, transport until finishing the all work. The automatic mode of this line greatly lowers the cost of manufacture.

Main parameters
A. Operation height: About 750mm
B. Dimension of conveyor: About 2000 X 15000mm
C. Dimension of main frame: About 1000 X 3500mm
D. Hydraulic motor power: About 5.5KW

H-profile specifications
A. Main welding speed: 500-2000mm/min
B. Inclination of H-profile steel: 8degree (unilateral)
C. Web thickness: 3-8mm
D. Web width: 300-1200mm
E. Web length: 2000-15000mm
F. Wing thickness: 5-16mm
G. Wing width: 150-500mm
H. Wing length: 2000-15000mm

Working flow:
Put the wing panel on the conveyor---oil vat for turning the wing panel work---upright the two wing---oil vat for turning wing panel reposition ---oil vat for lifting work---wing panel lifting---put the web panel on the conveyor ---oil vat for lifting descend ---web panel and two wing panels on the conveyor ---adjust them as requirement---spot weld the head of three panel and let them to be H-profile.