Contact Platform Support
Help CenterSilicone Rubber for Plaster /gypsum Moulding (Tin Catalyst Series)
Related Products
-
RTV-2 Mould Making Silicone Rubber for Soap MoldsUS$ 9.6 - 9.6MOQ: 200 Meters -
RTV-2 Silicone Rubber for Mold MakingUS$ 9.8 - 9.8MOQ: 200 Meters
-
RTV-2 Silicone Rubber for Making Plaster and Candle MoldsUS$ 9.6 - 9.6MOQ: 200 Meters
-
Supplier of Silicone Rubber for Mold Making Series for Concrete ProductsUS$ 9.6 - 9.6MOQ: 200 Meters
-
Solvent Based Thermoplastic TPU Adhesive for Fabric and Garment ApplicationUS$ 2.22MOQ: 1 Kilogram
Specifications
Silicone rubber Features:1) Low linear shrinkage 2)Good operation 3) high tear strength 4)curing agent for free 5)Easy de-mold
Sell Silicone rubber for plaster /gypsum moulding (Tin catalyst series)
Silicone rubber HY-638 application:
Silicone RTV (HY-638 ) is two parts condensation liquid silicone rubber that can be cure under room temperature. silicone rubber mainly used for the manufacturer of products made of unsaturated resin, epoxy resin, polyurethane, etc.
gypsum moulding (Tin catalyst series)\" jquery172048872607761806613=\"76\"/>
Silicone rubber(HY-638) features:
HY-638# silicone rubber is mainly with the advantages of good tensile strength, high tear strength, high temperature resistance, high duplication times and repeated use, etc.
Silicone rubber(HY-638) is the most suitable for small products or fine and precision products which is difficult to demould. This silicone rubber is one of the products with the highest use level in the production of craftwork gifts and the shrinkage less than 0.2%.gypsum moulding (Tin catalyst series)\" jquery172048872607761806613=\"77\"/>
gypsum moulding (Tin catalyst series)\" jquery172048872607761806613=\"78\"/>
Silicone rubber(HY-638) datasheet :
Model |
Appearance |
Viscosity (cs) |
Hardness (Ao) |
Tensile Strength (kgf/c) |
Tear Strength (kgf/) |
Elongation (%) |
Mixing ratio(%) |
Operating Time(H) |
Curing Time(H) |
638 |
White |
14000~16000 |
25~28 |
≥35 |
≥25 |
≥500 |
2~3 |
0.5 |
2~4 |
Silicone rubber (HY-638 RTV-2) instruction:
1. Adding curing agent 1%, the silicone can still be operated within 2.5 hours and can be
demoulded after 6-8 hours.
2. Adding curing agent 2%, the silicone can still be operated within 50 minutes to 1 hour and
can be demoulded after 2-3 hours.
3. Adding curing agent 3%, the silicone can still be operated within 28 - 30 minutes and can
be demoulded after 1.5-2 hours.
4. Adding curing agent 4%, the silicone can still be operated within 10 - 15 minutes and can
be demoulded after 1 -1.5 hours.
Send Inquiry to This Supplier
You May Also Like
-
Silicone & ProductsNegotiableMOQ: 2400 Kilograms
-
50ml Loctite Screw Glue 290 Penetrating Medium Strengthanti-loose Metal Thread Locking Agent 222 243 242NegotiableMOQ: 1 Bag
-
Low Temperature Hot Melt Adhesive for Baby Diaper and NapkinsUS$ 2.8 - 3.2MOQ: 1 Ton
-
2016 Zhengzhou Factory Natural Artificial Stone Mold for Making Artificial StoneUS$ 1 - 30MOQ: 1000 Pieces
-
Hot Seal de High Quality Silicon Rubber Bushing From China O RingsUS$ 0.1 - 10MOQ: 100 Pieces
-
Aluminum Foil Self-adhesive TapeNegotiableMOQ: 100 Rolls
-
Glue Stick, Hot Melt Glue Stick, Glue Gun StickUS$ 2.9 - 2.9MOQ: 100 Kilograms
-
Best Quality Cheapest Animal Shape Silicone Rubber Oven MittsNegotiableMOQ: 2000 Pieces
-
8 Pieces in a Pack Super GlueUS$ 0.33 - 0.33MOQ: 1800 Sets
-
Mmodified Corn StarchUS$ 675 - 705MOQ: 10 Tons
