Over Voltage Stalling Protection Mutiple Control Terminals IP20 Below 7.5 kw VFD AC Drive

model          

KOC-P5-75T4   

gross weight                         

it all depends

dimension                                                                                                                    

(wall-hooked or(cabinet stype)

input voltage fluction              

3 phase 380 volts -15%~+10% (323~418 volts)

input rated frequency      

50/60hz5% (47.5~63 hz)

output ration

100% continuousness

output rated voltage                          

max. output voltage is the same as the input voltage

max. overload current          

120% 1min , 130% 6 secs

control mode      

SVPWM control

frequency range            

0~120 hz

frequency  accuracy

digital command 0.01%(-10%~+40%)

set frequency resolution

digital command 0.01hz ; analogue command 0.1hz/60hz

output frequency resolution

0.01hz

voltage/frequency feature        

34 fixed V/F features selectable, any V/F features can be set.

acc/dec feature          

0.1~9999secs (acceleration and deceleration time set separately)

brake torque   

125% with additional brake resistor

frequency set signal                    

0~10volts , 0~5volts , 4~20mA , 0~20mA

protection                                      

over voltage, over voltage stalling, under voltage, current limit, over current ,overload ,overheat ,electronic terminal relay, data protection, under load precaution, loaded short circuit

two lines LED display                       

parameter set/ running display/ faults display/ function code/ data/ status

working environmemt    

installation place: indoors, not higher than 1000m above sea level,without dust, corrosive air and direct sunlight.

ambient temperature and humiditty: -10~40°c,20%~90%RH( without dewing)

vibration: lower than 0.5g when below 20hz

storage temperature: -20~+65°c