US$ 3 - 8 MOQ: 100 Kilograms
Key Specifications
Get Latest Price
Place of Origin:
Shandong, China
Brand Name:
DONQIN
Model Number:
DQFD962
Payment & Shipping
Payment Methods:
Port of Shipment:
qingdao tianjin shanghai and so on
Delivery Detail:
Delivery time depends on order quantity.
Place of Origin Shandong, China
Brand Name DONQIN
Model Number DQFD962
Material Other, POM
Thickness 5MM-120MM
Size 0.6m*1.2m 1m*1m 1m*2m

POM(Polyacetal) sheet

Properties

 POM is characterized by its high strength, hardness and rigidity to -40 °C. POM is intrinsically opaque white, due to its high crystalline composition, but it is available in all colors. POM has a density of ρ = 1.410-1.420 g/cm3.[5]

POM homopolymer is a semi-crystalline polymer (75-85% crystalline) with a melting point of 175° Celsius. The POM copolymer has a slightly lower melting point of 162 – 173° Celsius.

POM is a tough material with a very low coefficient of friction. However, it is susceptible to polymer degradation catalyzed by acids, which is why both polymer types are stabilized. Both homopolymer and copolymer have chain end groups (introduced via end capping) which resist depolymerization. With the copolymer, the second unit normally is a C2 (ethylene glycol) or C4 (1,4-butanediol) unit, which is introduced via its cyclic acetal (which can be made from the diol and formaldehyde) or cyclic ether (e.g. ethylene oxide). These units resist chain cleavage, because the O-linkage is now no longer an acetal group, but an ether linkage, which is stable to hydrolysis. POM is sensitive to oxidation, and an anti-oxidant is normally added to molding grades of the material.

POM advantages:

High abrasion resistance

Low coefficient of friction

High heat resistance

Good electrical and dielectric properties

Low water absorption

Usage:

 Mechanical gears, sliding and guiding elements, housing parts, springs, chains, screws, nuts, fan wheels, pump parts, valve bodies.

Electrical Engineering: insulators, bobbins, connectors, parts for electronic devices such as televisions, telephones, etc.

Vehicle: Fuel sender unit, Light stock (including shifter for light, turn signal), power windows, door lock systems, articulated shells.

Model: Thin, later claimed Modellbahnen parts, such as bogies and handle bars. POM breaks under load slightly less than ABS, but in bright translucent colors, and not paintable.

Medical: insulin pen, Metered dose inhalers (MDI)

Furniture: hardware, locks, handles, hinges, or even curtains roles.

Construction: Structural Glass - pod holder for point

Packaging: aerosol cans, vehicle tanks.

Sports: Paintball accessories. It is often used for machined parts of paintball markers that do not require the strength of aluminum, such as handles and reciprocating bolts. POM is also used in airsoft guns, in order to reduce the noise of the piston.

Clothing: zippers.

Music: picks, Irish flutes, Bagpipes, Practice chanters, harpsichord plectra, tuba mouthpieces .

Dining: Fully automatic coffee brewers; knife handles (particularly folding knives)

The Food and Drug Administration has approved Delrin for use in the food industry.

Performance table:

Density

1.405g/cm³
Tensile strength70MPa
Impact strength(nick)8KJ/m²
Bend strength130~150MPa
Compression strength126MPa
Elongation6.0%
Shear strength80~95MPa
Hardness(HB)270~280N/mm²
The highest continuous temperature110°C
Break down resistance18.6KV/mm 
Elastic modulus in tension 26.4~31Gpa

 

Send Inquiry to This Supplier

Message
0/5000

Want the best price? Post an RFQ now!
Business Type
Manufacturer, Trading Company
Year Established
2006
Factory Size
30,000-50,000 square meters
Total Employees
101 - 200 People