RG/2MCS-RG/2MBZGas (filter) Regulator-max Inlet Pressure 5bar(DN65-DN80-DN100)

Technical Parameters:

1.Inlet pressure:P1max 5bar

2.Outlet pressure:P2:1.3Kpa-150Kpa(13-1500mbar)

3.Regulation accuracy(AC):≤±10%

4.closed pressure(SG):≤+10%

5.cut off accuracy(AG):≤+10%

6.Applicable Medium:noncorrosive gases , for example:gas, natural gas, LPG etc.  

7.Medium temperature:-20°C-+60°C

8.Max medium temperature:60°C

9.Connection type:Flange(according with ISO7005)

10. Pressure Range:Reference spring pressure range table

11.closed time:<1second

12. mechanical strength:the 2second(accord with EN13611:2007)

Overall dimensions

* The regulator with a guide device(P2=200-1500mbar)

Installation matters needing attention and demonstration figure

1. The regulator pipeline does not allow to have the impurities, Must sweep the pipeline.

2. Gas inlet pressure regulator must not be more than the pressure rated.

3. Must be put on the hair according to indicate the gas flow direction perpendicular installation, and keep the diaphragm level.

4. Must be connected external take pressure pipe G3/8” to export side piping

5.Must be connected discharge atmospheric tubeG3/4”.