Contact Platform Support
Help CenterExpanded PTFE Joint Sealant
Related Products
-
Expanded Ptfe Sealing Joint 3mm x 1.5mm x 50mUS$ 10 - 30MOQ: 200 Kilograms -
PTFE Joint Sealant TapeUS$ 10 - 30MOQ: 200 Kilograms
-
Ptfe SoakedNegotiableMOQ: 50 Kilograms
-
Various Fillers of PTFE Products /PTFE Filled Goods China ManufacturerUS$ 8 - 16MOQ: 100 Kilograms
-
With Oil Ptfe RopeUS$ 9 - 18MOQ: 50 Kilograms
Expanded PTFE Joint Sealan
1. Description
Made of pure Expanded PTFE, widely used in the transport and sealing of industrial fluids. It is the most cost-effective alternative to sheet gasketing for large equipment flanges. Because it is a form-in-place gasket, so it nearly can be used in any sealing surface. Especially for the irregularities and damaged flange surface, Expanded PTFE joint is the best choice.
2. Advantage:
Easy to install
Low stress-to-seal
Can conform to any surface, including rough, pitted, scratched and damaged surfaces.
Resistant to creep and cold flow
100% expanded PTFE, has the same chemical inertness of pure virgin PTFE.
Unlimited Shelf Life
Over compression is no problem
3. Technical Data:
Temperature: -100°C ~ 280°C
Pressure: 20Mpa(fluid); 14Mpa(gases)
PH range: 0 ~ 14
Tensile Strength: ≤ 8 Mpa
Compressibility: 55% ~ 80%
Creep relaxation: ≤ 40%
4. Offer Size:
Width:3 ~ 100mm
Thickness: 1 ~ 10mm
Length: 3 ~ 30m
5. Applications:
PTFE Joint Sealant is especially suite d for sealing flange connections, pipe systems, hydraulic and pneumatic systems, etc. In addition, it’s also ideal for seals in glass, enamel and plastic flanges, vessels and special shaped sealing surface.
PTFE Joint Sealant saves money and time. Since there is no scrap or waste, it costs less than other gasket materials. By using only a few sizes, large inventories of sheet gasketing and costly precut gaskets can be eliminated. Installation time is kept to a minimum since there are no templates, precutting or special fitting requirements.
6 Photos:
Send Inquiry to This Supplier
You May Also Like
-
PPO PX9406-111 High Flow Injection Molding Material for Complex PartsNegotiableMOQ: 1 Kilogram
-
PP Granules 3009 - Flame Retardant PP Compound for Electrical Components, UL94 V-2 RatedNegotiableMOQ: 1 Kilogram
-
Kolon POM KOCETAL K100 K300 K500 K700 K900 Polyformaldehyde POM Resin Raw Material Made in KoreaUS$ 1.88 - 2.05MOQ: 25 Kilograms
-
Polymers & ResinsNegotiableMOQ: 2000 Bags
-
Fluorocarbon Powder Coating & Epoxy Flake Floor Coating - Chemical Resistant SolutionsNegotiableMOQ: 500 Kilograms
-
Economic Interlocking Horse and Cow Stable Mat Made of Rubber or EVAUS$ 13.5 - 35.4MOQ: 100 Pieces
-
SAP Super Absorbent Polymer for Sanitary Napkins or DiapersUS$ 1.5 - 2MOQ: 1000 Kilograms
-
Slip Additive Masterbatch With PE CarrierUS$ 2.3 - 2.5MOQ: 500 Kilograms
-
UHMW PE Powder for Lead-acid Battery SeparatorUS$ 2,750 - 2,850MOQ: 1 Ton
-
Pet Flakes Hot Wash / Pet Flakes Chip / Hot Washed Pet FlakesUS$ 650 - 680MOQ: 22 Tons
