GKC-BA Tester for Mechanical Characteristic of High-voltage Circuit Breaker
GKC-BA Tester for Mechanical Characteristic of High-voltage Circuit Breaker
Overview
This product applies to the mechanical properties test of all kinds of import or domestic models of bulk-oil circuit breaker, oil-poor circuit breaker, SF6-type, vacuum and other circuit breaker. It is also applicable to time tests of electromagnetic appliances (such as contactors, relays, etc.).
Main properties
Features
LCD display, Chinese menu, printing device, simple operation;
Comprehensive analysis and display of test data;
Using the data table to show the main parameters of the circuit breaker;
display the test data clearly with travel time curve, travel speed curve, port statechart diagram and time¤t curve; show the coordinates of any point on the curve;
Provide an internal power supply: adjustable DC (0-250V), current: less than 15A;
Any external power supply also can be controlled and measured by our instrument.
If the operating machine needs an AC power supply, we can use the AC sampling methods in the test.
Test Data
Time:
Inherent breaking (closing) time
In-phase non-synchronous breaking (closing)
Inter-phase non-synchronous breaking (closing)
Closing (breaking) Bounce Time
Closing-breaking time (re-closing)
Breaking-closing time (re-closing)
Speed:
Speed at instant separating (touching)
The maximum speed of breaking (closing)
The average speed of specified time period (or travel section or turning angle section)
Stroke: Dynamic contact stroke (clearance of the stroke)
Contact travel (into the trip)
Breaking rebound amplitude
Low-voltage operating characteristics
Operating current characteristics
Instrumental Specification
Power supply:
Voltage: AC220V ± 10%
Frequency: 50Hz ± 5%
Time test:
Test Range: 0.1ms ~ 997ms
Accuracy: ± (0.1% reading +1 digit)
Graphic Display: 13 Road ≮ 0.1ms all transitions
Speed test:
Speed testing range: 1mm sensor 0.01 ~ 25.00m /s,
0.1mm sensor 0.001 ~ 2.50m /s
1°sensor : 1 cycle / 1°
Accuracy: 1mm sensor ± (1% of reading +1 digit)
0.1mm sensor ± (2% of reading +1 digit)
1°angle sensor ± (1% of reading +1 digit)
Stroke Test:
Test range: 1mm sensor 0 ~ 750mm
0.1mm sensor 0.1 ~ 40mm
1°angle sensor 0 ~ 360°
Accuracy: ± (1% reading +1 digit)
Graphic Display:
S-t curve and value of each 1mm or 0.1mm or 1° displacement (angle)
Current characteristic test:
Test range: 40mA~10A
Resolution ratio: 40mA
Accuracy: ± (1% reading +40mA)
Graphic display:
I-t curve and value of each point (I , t) on this curve
DC power supply:
Output voltage: 0~250V continuous and adjustable
Output current: £15A
Load variation rate: £5%
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Computer Controlled Electronic Universal Tensile Testing Machine With Aluminum Foil CopperUS$ 4500 - 10000MOQ: 1 Set
-
OMP60 Renishaw Probe A-4038-0001-21 A-4038-0002 Original and NewNegotiableMOQ: 1 Piece
-
Computerized Servo Motor Control Universal Tensile Testing MachineUS$ 4500 - 10000MOQ: 1 Set
-
Computerized Electronic Table Type Universal Testing Machine Tensile and Compression TestUS$ 4500 - 10000MOQ: 1 Set
-
Computer Controlled Electronic Universal Tensile Testing Machine 20knUS$ 4500 - 10000MOQ: 1 Set
-
Computerized Universal Testing Machine With Extensometer 20knUS$ 4500 - 10000MOQ: 1 Set
-
Servo Motor Control Material Lab Testing Machine With ExtensometerUS$ 4500 - 10000MOQ: 1 Set
-
30kn Computerized Servo Motor Control Universal Tensile Testing MachineUS$ 4500 - 10000MOQ: 1 Set
-
Computer Controlled Electronic Fabric Tensile Strength TesterUS$ 4500 - 10000MOQ: 1 Set