YOKOGAWA EJX110A Differential Pressure Transmitter
Specifications
High performance YOKOGAWA EJX110ADifferential Pressure Transmitter.Outputs a 4 to 20 mA DC signal correspondingto the measured
YOKOGAWA EJX110A Differential Pressure Transmitter
Brand-new inoriginal packageWith Certificate of origin
Product Information
The high performance differential pressuretransmitter EJX110A features single crystal silicon resonant sensor and issuitable to measure liquid, gas, or steam flow as well as liquid level, densityand pressure. The multi-sensing technology provides the advanced diagnosticfunction to detect such abnormalities as an impulse line blockage or heat tracebreakage.
The EJX series of differential pressuretransmitters are available with BRAIN, HART, and FOUNDATION™ fieldbuscommunication protocols
< Ordering Information> “◊”
Specify the following when ordering.
For output signal code –J, refer to GS01C25T01- 01EN.
1. Model, suffix codes, and option codes
2. Calibration range and units
1) Calibration range can be specified withrange value specifications up to 5 digits (excluding any decimal point) for lowor high range limits within the range of -32000 to 32000. When reverse range isdesignated, specify Lower Range Value(LRV) as greater than Upper RangeValue(URV). When square root output mode is specified, LRV must be “0 (zero) ”.
2) Specify only one unit from the table,‘Factory setting.’
3. Select linear or square root for outputmode and display mode.
Note: If not specified, the instrument isshipped set for linear mode.
4. Display scale and units (for transmittersequipped with the integral indicator only)
Specify either 0 to 100 % or ‘Range andUnit’ for engineering units scale:
Scale range can be specified with rangelimit specifications up to 5 digits (excluding any decimal point) for low orhigh range limits within the range of -32000 to 32000. Unit display consists of6-digit, therefore, if the specified scaling unit excluding ‘/’ is longer than6-characters , the first 6 characters will be displayed on the unit display.
5. Tag Number (if required)
For BRAIN communication type, specify upto16 letters. The specified letters will be written in the amplifier memory andengraved on the tag plate.
For HART communication type, specifysoftware tag (up to 8 letters) to be written on the amplifier memory and Tag number(upto 16 letters) to be engraved on the tag plate seperately.
6. Other factory configurations (ifrequired) Specifying option code CA or CBwill allow further configuration atfactory. Following are configurable items and setting range.
[/CA : For HART communication type]
1) Descriptor (up to 16 characters)
2) Message (up to 30 characters)
3) Software damping in second (0.00 to100.00)
[/CB : For BRAIN communication type]
1) Softwaredamping in second (0.00 to 100.00)
Send Inquiry to This Supplier
You May Also Like
-
SCOUT100EX Vibration Data Collector ,Analyzer and BalancerNegotiableMOQ: 1 Piece
-
Electrical Distribution Box/Electric Panel Box Power Distribution CabinetNegotiableMOQ: 1 Set
-
Network CabinetNegotiableMOQ: 2400 Sets
-
Custom Stamping Aluminum Electronic Enclosures Custom Sheet Metal EnclosureNegotiableMOQ: 1
-
Precision Meter Box Hot Sale Non-standard Supplier in ChinaUS$ 0.5 - 2.5MOQ: 500 Pieces
-
Controller for Solar Panel SMTUS$ 20 - 500MOQ: 100 Pieces
-
Box pc Cheap,metal Box Silver,metal Parts BoxUS$ 5 - 10MOQ: 100 Pieces
-
BJX Explosion-proof Junction Box,hand Tools,safety Tools,ISO9001,UKASUS$ 38.4 - 321.6MOQ: 1 Piece
-
Creative Desktop DIY Wood Increased Computer RackUS$ 0.1 - 1MOQ: 50 Pieces
-
SMC Meter Box, Sheet Compression MoldedUS$ 5 - 10MOQ: 100 Pieces