Yokogawa Model PFCS PFCD Field Control Station

Yokogawa Model PFCS Field Control StationPFCD Duplexed Field Control Station

GENERAL

This GS covers the hardware specificationsfor Field Control Station and Duplexed Field Control Station.

HARDWARE SPECIFICATIONS

For the installation specifications commonto the systems, refer to “System Overview (GS 33Q01B10-

31E).”

Processor

R4300

Memory Protection During Power Failure

Battery

Battery Back-up for Main Memory: Max. 72hours

Battery Recharge Time: Min. 48 hours

FCS Status Contact Output

2 terminals (NC, C)

Contact Points open during FCS failure

Contact Rating: 30 V DC, max. 0.3 A

Communication Interface

V net Interface: Dual-redundant or Single

Power Supply

(specify with Suffix Codes)

100-120 V AC, 50/60 Hz

220-240 V AC, 50/60 Hz

24 V DC

Electric Power Consumption

When max. no. of I/Os is installed:

100-120 V AC: 200 VA

220-240 V AC: 300 VA

24 V DC: 9 A

Weight:

Approx. 13 kg (PFCS)

Approx. 16 kg (PFCD)

Mounting

19” Rack Mounting: Rack mount(8xM5 screws)

Insulation bush (accessory)

Connection

Power Supply: M4 screw terminal connection

Grounding: M4 screw terminal connection

Contact Output: M4 screw terminalconnection

Regulatory Compliance

For the detailed information of followingstandards, see “System Overview (GS 33Q01B10-31E).”

Safety Standards

[CSA] (for 100-120 V AC power supply)

[CE Mark] (for 220-240 V AC power supply)

EMC Conformity Standards

[CE Mark] (for 220-240 V AC and 24 V DCpower supply)

[C-Tick Mark] (for 220-240 V AC and 24 VDC power supply)

PFCS-S2110PFCS-S2210  PFCS-S5110 PFCS-S5210 PFCS-E2110 PFCS-E2210  PFCS-E5110PFCS-E5210 PFCS-H2712 PFCS-H5712 PFCS-H5812 PFCS-H5822

PFCD-S2110PFCD-S2210 PFCD-S5110 PFCD-S5210 PFCD-E2110 PFCD-E2210 PFCD-E5110PFCD-E5210 PFCD-H2612 PFCD-H2622 PFCD-H5612 PFCD-H5622