Oxidize-free copper rod feedstock copper strip continuous extrusion press

Oxidize-free copper rod feedstock copper strip continuous extrusion press

Copper continuous extrusion is a new technical for copper processing, the feedstock is oxidize-fre

Continuous Copper Extrusion Machine

Copper continuous extrusion is a new technical for copper processing, the feedstock is oxidize-free copper rod. It uses rod material, grain material and powder material as ingot to extrude various pipe material, section material, belt material, bar material through different dies.

 

New technique

Driven by the rotating extrusion wheel, feedstock pass through the die in the chamber thus extruded varies shape copper output. The processing is continuous.

Feedstock can be pure copper and copper alloy.

Neither heating nor annealing process, less energy cost.

One feedstock size, one process, one die for production..

Low cost and simple operation

Shape and forming finished products at a time, it is quick and convenient to change the die.

One set of equipment can be used to produce several kinds of products, and one process line only needs 1-2 operators. All the production process can be controlled by the computer easily..

The process line take up small area and it is low consumption.

Main specification and parts of continuous extrusion process line.

A. Main technical specification

Model	TLJ250	TLJ300	TLJ300A	TLJ350	TLJ400	TLJ500	TLJ630
Wheel Diameter (mm)	250	300	300	350	400	500	630
Feedstock Materical	Copper	Copper and copper alloy
Feedstock Diameter(mm)	8.0	12.5	12.5	16.0	20.0	25.0	30.0
Max. Product Width (mm)	14	30	40	70	170	250	320
Product  Section Area (mm ²)	5~50	10~150	10~200	600	2000	3800	6400
Output rate (kg/h)	140	400	600	760	1400	2000	3000

B. Content of process line

Continuous extrusion process line is mainly composed of main engine, its accessory ststem (hydraulic system, lubricating system, cooling system), feeding reel, straightener, tenslator, wire-rewinding machine and feeding system.