Standard Flat Pack Portable Commercial Buildings - Hotel Accommodation

Standard Flat Pack Portable Commercial Buildings - Hotel Accommodation

Description:

It includes a 300-square-meter’s lobby and 300 pcs of 6mx3m modular spaces. These modular spaces are joined by corridor and covered with red special roof with unique design. The partition wall between modules can be set up or moved as required in order to meet the requirements of different growth stage corps in the park so that the project is very popular for the tenants.

Applications:

The lobby is mainly used for company’s exhibition, conference or party in the park. The space of module had been divided as different sizes according to the tenant’s requirement in order to accommodate different IT enterprises.

Specifications:

I.     Floor

Steel frame                    - made from cold rolled, welded steel profiles, 4 mm thick

                                    - 4 corner casts, welded

                                    - 2 fork lift pockets (except 30’) - distance 1200mm

                                      (Internal clearance of fork lift pockets: 240×80 mm)

                                    - Steel cross members, thickness=2mm

Insulation                      - 100 mm thick Rock Wool

Subfloor                        - 0.5mm thick, galvanized steel sheet

Floor                             - 18mm plywood board

                                    - 1.8mm PVC floor

                                      Flammability class B1 - hardly combustible

                                      Smoke density class Q1 - low smoke emission

                                      Wear resistance factor: T level

II.   Roof

Steel frame                   - made from cold rolled, welded steel profiles, 3mm thick

                                    - 4 corner casts, welded

                                    -  steel cross members,thickness=2mm
 

Roof cover                     - 0.5mmthick, galvanized steel sheet

                                      360 degree seaming at joint of roof panels

Insulation                     - 100 mm thick Rock Wool

Ceiling                          - 10 mm chipboard (V 20), laminated on both sides, white

                                      The chipboard complies with the emission value E1

CEE connector              - sunken in frame on short end side

III.         Corner Post

                                    - Cold rolled 3 mm thick steel profiles

                                      Screwed to the roof and floor frame

IV.  Wall Panels

Thickness                     - 50mm

External cladding          - corrugated, galvanized and coated steel sheet, 0.5 mm thick

Insulation                      - 50mm thick NeoporR EPS

Internal cladding            - corrugated, galvanized and coated steel sheet, 0.5 mm thick, Color: white (RAL9001)

V.    Insulation

Rockwool                      - density: 120kg/m3

                                    - Flammability class A- non combustible

                                      Smoke density class Q1 - low smoke emission

                                    - certificated: CE & GL

   NeoporR                    - density: 18kg/m3

                                    - Flammability class B1- non combustible

                                      Smoke density class Q1 - low smoke emission

                                    - certificated: CE & GL

VI.  Doors

External door                 - right or left hand hinged

                                    - Alum frame with rubble sealing

- Dimensions:

Internal door                  - right or left hand hinged

(Option)                        - Door blade with galvanized steel sheets on both sides

                                    - Steel frame with rubble s