The classification of latest magnetic separator

Plat ring magnetic sepatator adopts ring chain to form a closed circulation, copper tube of coil to form a low voltage strong current, cold water to calm down tempreture and gear board as separation medium. Plat ring magnetic separator is composed of feeding device, concentrate ore and medium ore rinse device, separation middlings turn ring, magnetic department, answer the ore device, gearing and dc power supply. Novel as the structure is, magnetic department consists of concentric rings inside and outside magnetic strength, radial iron core and coil. The spindle is located in the center of the ring closed magnetic circuit and no magnetic lines through. The coil is made by the 22 × 15 × 2 mm square brass around and each of the outer core coil are 33 turns and the inner core coil 66 turns, which close to the pole. The coil cooling uses cold water, have features of good cooling effect, low cost and no noise.
SHP type wet high intensity magnetic separator
SHP wet high intensity magnetic separator is also known as double-disc intensity magnetic separator, which is in imitated from abroad Jones (JONES) based on magnetic machine information and many a trial.
On the steel frame where equipped with two U-shaped yoke, in the horizontal part of which is the excitation coil. It uses the axial fan for forced cooling. The sorting disc above and below are installed in the vertical center axis. The disc is rotating between the two opposite poles, constitute a closed circuit through the U-shaped yoke magnetic pole and the two selected discs. And the two separation plates are the main magnetic circuit. Around disks are 17 sorting rooms, which are equipped with multi-layer assembled magnetic tooth plate, called induction magnetic pole. A rope the mine tube is on the disc, below which is pick mine shafts. The mine mouth is installed at the corresponding parts in the rope mine.
Vertical ring (φ800 mm) and wet high intensity magnetic separator consists of a metal ring, which is vertical rotating between the two poles. In the lower magnetic field, the pulp is given into the ring from the lower part of the ring to the mine through the ring round screen grate. The weakly magnetic mineral particles adhere to the surface of the medium ring and rotation with the ring and then promoted to the top of weak intensity field, and finally washed into the concentrate tank by the high-pressure water. Non-magnetic mineral particles which are free from the magnetic force flow into the tailings slot through the gap dielectric sphere.
 

Cement making plant : /5.htm
Rock crusher : /hammercrusher.htm