Contact Platform Support
Help Center10 / 100 / 1000Mbps Copper Fiber SFP Transceiver Module For 1.25 Gigabit Ethernet
Related Products
-
Bi-Directional 1.25G T x 1490nm - R x 1310nm 20km Fiber Optical SFP Transceiver ModuleNegotiableMOQ: 1 Piece -
Duplex LC Connector 1.25Gbps 850nm GE SFP Transceiver Module GLC-SX-MMNegotiableMOQ: 1 Meter
-
TRx 850nm 1.25Gbps SFP Transceiver Module With 300m / 550m TransmissionNegotiableMOQ: 1 Kilogram
-
3.3V Single Power Router / Server Interface 1.25G TR X1310nm 20km SFP Transceiver ModuleNegotiableMOQ: 1 Piece
-
1600 nm 80km 1.25G DWDM Fiber SFP Transceiver Module With ITU.T C / L BandNegotiableMOQ: 1 Piece
Certification:FCC, CE, RoHS
10 / 100 / 1000Mbps Copper SFP Transceiver Module For 1.25 Gigabit Ethernet
Features
l Up to 1.25Gb/s bi-directional data links
l Hot-pluggable SFP footprint
l Extended case temperature range (0°C to +70°C )
l Fully metallic enclosure for low EMI
l Low power dissipation (1.05 W typical)
l Compact RJ-45 connector assembly
l Access to physical layer IC via 2-wire serial bus
l 1000 BASE-T operation in host systems with SERDES interface
l 10/100/1000Mbps compliant in host systems with SGMII interface
Applications
l 1.25 Gigabit Ethernet over Cat 5 cable
Description
Rollball’s RTSFP-GB-P3 Copper Small Form Pluggable (SFP)transceivers is high performance, cost effective module compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and IEEE 802.3ab, which supp- orting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-pair category 5 cable. The module supports1000 Mbps full duplex data-links with 5-level Pulse Amplitude Modulation (PAM) signals. All four pairs in the cable are used with symbol rate at 250Mbps on each pair. The module provides standard serial ID information compliant with SFP MSA, which can be accessed with address of A0h via the 2wire serial CMOS EEPROM protocol. The physical IC can also be accessed via 2wire serial bus at address ACh.
Specification:
|
General |
||||||
|
Parameter |
Symbol |
Min |
Typ |
Max |
Units |
Notes/Conditions |
|
Data Rate |
BR |
10 |
1,000 |
Mb/sec |
IEEE 802.3 compatible. See Notes 2 through 4 below |
|
|
Cable Length |
L |
100 |
m |
Category 5 UTP. BER <10-12 |
Notes:
1. Clock tolerance is 50 ppm
2. By default, the RTSFP-GB-P3 is a full duplex device in preferred master mode
3. Automatic crossover detection is enabled. External crossover cable is not required
4. 1000 BASE-T operation requires the host system to have an SGMII interface with no clocks, and the module PHY to be configured per Application Note AN-2036. With a SERDES that does not support SGMII, the module will operate at 1000BASE-T only.
Send Inquiry to This Supplier
You May Also Like
-
SAGINOMIYA Japan Air Conditioning Expansion Valve ATX-34035DUS/34023DUS/ATX-7140DPSUS$ 75 - 160MOQ: 1 Piece
-
Heat ExchangerNegotiableMOQ: 2300 Sets
-
Rotate Vacuum Evaporation Instrument/machine /equipment3US$ 35000.00MOQ: 1 Set
-
Valve Plastic Vinyl Rubber Flat Rectangular Handle Bar Grips FVG SeriesNegotiableMOQ: 100 Pieces
-
Vegetables Fruits Fresh Vacuum Precooling MachineNegotiableMOQ: 1
-
Factory Outlet 4HP Semi-hermetic Compressor 1003089 For SaleNegotiableMOQ: 1
-
Used Compressor Refrigerator for Sale 500 MTNegotiableMOQ: 10 Tons
-
Grate Cooling Machine for SaleUS$ 10,000 - 20,000MOQ: 1 Set
-
12L Capapity Air Oil Cooler for Concrete Mixer TruckUS$ 180 - 230MOQ: 1 Piece
-
Automatic Discharging Pellet BurnerUS$ 1,000 - 9,900,000MOQ: 1 Set
