Contact Platform Support
Help CenterFull-duplex Mode IEEE802.3z/AB Fiber Optic Components Media Converters With SFP Port
Related Products
-
Hot Pluggable TR x 1310nm 10KM SFP+ LR Optical Fiber Transceiver Components 10G ModuleNegotiableMOQ: 1 Piece -
TRx1310nm 10KM Fiber Optic Component 10G Module With Digital Diagnostic, XFP MSA PackageNegotiableMOQ: 1 Case
-
WS-G5486 1310nm Singlemode / Multimode Fiber Optic Components GBIC Transceiver ModuleNegotiableMOQ: 1 Piece
-
T x 1550nm - R x 1310nm 20km Bi-Directional SFP Transceiver Module Fiber Optic ComponentsNegotiableMOQ: 1 Piece
-
Singlemode / Multimode Fiber Optic Components Multiplexer PDH With 4E1 + Ethernet PortNegotiableMOQ: 1 Set
Certification:RoHS
Full-duplex Mode IEEE802.3z/AB Fiber Optic Components Media Converters With SFP Port
1．Overview
IEEE802.3z/AB 1000Mbps Gigabit Ethernet supports two types media for network connection such as 10/100/1000Base-T and 1000Base-SX/LX. The media converter is designed with a switch controller and buffer memory that connects two types segments to operate smoothly. With internal power unit, it provides good stability and reliability.
2.Checklist
Before you installing the Converter, verify that the package contains the following:
1).The TP-Fiber Media converter.
2).AC Power Cord.
3).This User’s Manual.
Piease notify your sales representative immediately if any of the aforementioned items is missing or damaged.
3. LED Description
There are six LED At Front View of Gigabit
SFP Converter
|
TP 100 |
Lit when TP speed is 100Mbps |
|
TP 1000 |
Lit when TP speed is 1000Mbps |
|
TP Act |
Lit when TP connection is good. Blinks when TP data is transmitting. |
|
TP FDX |
Lit when TP full-duplex mode is active.Off when TP half-duplex mode is active. Blinks when collision signal is present. |
|
FX Act |
Lit when TP connection is good. Blinks when TP data is transmitting. |
|
PWR |
Lit when +5V power is coming up. |
4.Installing the Converter
1).Attach a SFP to SFP Cage on the converter
2).Attach fiber cable from the Converter to the fiber network.. The fiber connections must be matched: transmit socket to receive socket.
3).Attach a UTP cable from the TP network device to the RJ45 port on the Converter.
4).Connect the power cord to the Converter and check that the Power LED lights up. The TP Act and FX Act LEDs will light when all the cable connections satisfactory.
5.Technical Specifications
The Converter conforms to the following standards:
Standerds: IEEE 802.3z/AB 10/1001000Base-T
1000Base-SX/LX
UTP Cable: Cat.5e orCat.6 cable and up to 100m.
Fiber Cable:
1000SX: 50/125,62.5/125µm molti-mode
1000LX: 9/125µm single-mode.
Data Transfer Rate:
2000Mbps for full-duplex at 1000Mbps speed.
LED Indicators:
TP Act, Fdx, 100, 1000 , Power, FX Act
TP Flow Control: NWay auto-negotiation
Fiber Flow Control: NWay at full-duplex mode
Power Requirement: 220V(175-260V)AC,50Hz
Ambient Temperature: 0 ～ 50℃
Humidity: 5% ～ 90%
dimensions:Internal:26×70×93mm
External Power: 40×1100×140mm(H×W×D)
Send Inquiry to This Supplier
You May Also Like
-
High Quality Plastic Box Assembly GEC026US$ 0.8 - 1MOQ: 1000 Pieces
-
Replacement Chassis For IphoneNegotiableMOQ: 1 Piece
-
Original Galaxy S II I9100 LCD+Touch Screen for Samsung (Black/White)NegotiableMOQ: 5 Pieces
-
1.77'' Small Size Tft Lcd Screen for Consumer Electronics Quality Choice Most PopularUS$ 0.10 - 0.50MOQ: 1 Piece
-
4.7" Lcd Touch Screen Panel for Mobile PhoneUS$ 0.1 - 10MOQ: 3000 Pieces
-
Arduino LCD 2.8 Inch TFT With Touch With SD UNO Card R3US$ 1 - 100MOQ: 1 Piece
-
Touch Siemens for TP270-10US$ 15 - 23MOQ: 1 Piece
-
Various Kinds of Spare PartsUS$ 0.25 - 0.65MOQ: 200 Pieces
-
Best Quality Metal Cell Phone PartsUS$ 0.15 - 10MOQ: 100 Pieces
-
Phone Accessory Lcd DisplayerNegotiableMOQ: 500 Pieces
