Contact Platform Support
Help CenterHeavy Heat Treatment Forging Marine Shafts Carbon Manganese Steel Forged Roller 60Mn 25Mn
Related Products
-
ASTM 20Mn2 Carbon Manganese Forged Steel Cargo Vessel Intermediate Shaft 18m LengthNegotiableMOQ: 1 Set -
2.0MW, 2.5MW Spindle Forgings, Forged Steel Main Shaft For Wind TurbineNegotiableMOQ: 1 Piece
-
60Mn 25Mn Carbon Manganes Steel Forged Propeller Shaft For Marine / Shipbuilding EquipmentNegotiableMOQ: 1 Set
-
Marine / Shipbuilding Intermediate Rolled Shaft Forging, Forged Carbon Manganese Steel 45#NegotiableMOQ: 1 Piece
-
20Mn2 / 60Mn Carbon Manganese Forged Steel Shaft Rudder Pintle For Cargo VesselNegotiableMOQ: 1 Piece
Certification:ABS, DNV, BV, GL, LR, KR, CCS, NK
Heavy Heat Treatment Forging Marine Shafts Carbon Manganese Steel Forged Roller 60Mn 25Mn
Description:
Forged steel shaft-marine shaft forging: intermediate shaft/ tail shaft/ propeller shaft/ is widely used for large, middle and small size cargo vessel etc.
The factory has been certified by ABS, DNV, BV, GL, LR, KR, NK and CCS.
The manufacturing equipment is 25~80MN hydraulic press, the forging ratio >4.5, the technical condition is in accordance with the requirements of ABS, DNV, BV, GL, LR, KR, NK and CCS.
The product can be provided as per your drawing or specified requirements.
Smelting Process:EF+LF + VDThe process as follow :Ingot →heat → forging → Heat treatment (Normalizing+ tempering) → Inspection →rough machining→UT →2nd Heat treatment →finishing machining →Inspection
Applications: Forged steel shaft-marine shaft forging: intermediate shaft/ tail shaft/ propeller shaft/ is widely used for large, middle and small size cargo vessel etc.
Specifications:
|
Description |
Forged steel shaft-marine shaft forging: intermediate shaft/ tail shaft/ propeller shaft |
|
material |
Carbon manganese steel (20Mn2, 60Mn, 25Mn, 45# etc.) |
|
Material standard |
ASTM or GB/T3077-1999 |
|
Dimension |
Max. OD of flange: 2500mm Max. Length: 18000mm |
|
Weight |
Max. 100 ton |
|
Smelting Process: |
EF+LF + VD |
|
Process |
Ingot→heat → forging → Heat treatment (Normalizing+ tempering) → Inspection →rough machining →UT →2nd Heat treatment →finishing machining →Inspection |
|
UT standard |
As per the requirements provided by classification society |
Competitive Advantage:
Quality control and management to the whole produce process, including ingot smelting, forging, heat treatment, machining and strictly final inspection prior to delivery.
Excellent product quality and service, competitive price, “in-time” delivery
Send Inquiry to This Supplier
You May Also Like
-
Swept Volume M3/hr 720 Steam CompressorNegotiableMOQ: 1 Set
-
SCAIR 60HP 1.2MPa Float Glass Compressor for Tin Bath Atmosphere & Annealing Lehr ControlNegotiableMOQ: 1 Unit
-
Swept Volume M3/hr 540 Steam CompressorNegotiableMOQ: 1 Set
-
Steam CompressorNegotiableMOQ: 1 Set
-
Flow 350 M3/min EI CompressorNegotiableMOQ: 1 Set
-
Flow 320 M3/min EI CompressorNegotiableMOQ: 1 Set
-
Flow 330m3/min EI CompressorNegotiableMOQ: 1 Set
-
Flow 290 M3/min EI CompressorNegotiableMOQ: 1 Set
-
Flow280 M3/min EI CompressorNegotiableMOQ: 1 Set
-
Flow 260 M3/min EI CompressorNegotiableMOQ: 1 Set
