Contact Platform Support
Help CenterHorizontal Francis Hydro Turbine With Runner Diameter Below 90cm
Related Products
-
Horizontal Small Francis Hydro Turbine With 100kw - 5MwNegotiableMOQ: 1 Piece -
Small Francis Hydro Turbine With Runner Diameter Below 90cmNegotiableMOQ: 1 Piece
-
100KW - 5MW Horizontal Francis Hydro Turbine With Simple ConstructionNegotiableMOQ: 1 Piece
-
3.3KV, 6.3KV AC Three Phase Small Francis Hydro Power TurbineNegotiableMOQ: 1 Metric Ton
-
Low Head Bulb Hydro Turbine With Fixed Blades / Movable BladesNegotiableMOQ: 1 Piece
Certification:CE
Horizontal Francis Hydro Turbine with Runner Diameter Below 90cm
Applications:
1. Water head: from 10m to 300m
2. Power: 100kw to 30Mw
3. Frequency: 50hz or 60hz
4. Output Type: 400V, 3.3KV, 6.3KV, or 10.5KV AC three phase,
If you are interest with the Francis turbine, you should send some key parameters (such as net head, flow discharge, unit number, frequency, voltage) in inquiry.
Normally, Medium size and larger Francis turbines are most often arranged with a vertical shaft, Small Francis turbine always arranged with horizontal shaft, but it is not absolute.
Descrition:
The Francis type turbine is mostly suitable for hydropower stations with medium or high head from 10m to 300m. They are in both vertical or horizontal shaft arrangement and could be vastly selected by the hydraulic power stations.
lts feature is that the water flow enters the runner inward in a radial direction , changes direction gradually and then passes out axially. Francis turbine is characterized by reliable operation, simple construction and high efficiency, etc.
Normally, we adopt the horizontal Francis with capacity below 5MW, runner diameter below 90cm. And the vertical Francis with capacity below 20MW.
Specifications:
|
Type |
Horizontal/vertical Francis turbine |
|
Water head |
From 10m to 300m. |
|
Installation capacity |
From 100KW to 20MW |
|
Runner material |
Stainless steel (0Cr13Ni4Mo) |
|
Generator type |
synchro generator |
|
Auxiliary Equipment |
Governor, Inlet Valve, unit side panel, excitation system |
Competitive Advantage:
HYDROTU is the complete Chinese hydropower equipment supply, consulting and engineering design venture in the field of hydropower equipment. We provide the high quality Chinese hydropower equipment with advanced technologies and integrated services to meet the global hydropower markets.
With our Integrated Services concept, we provide you with customized support from project planning through implementation to plant commissioning and service. Our principle: Customer’s project is our project , customer’s success is our success.
HYDROTU covers the services, complete equipment supply, economic solution of the global hydropower projects and aims to be the best global supplier of hydropower equipment as well as the best integrated services provider on the hydropower markets.
Send Inquiry to This Supplier
You May Also Like
-
Good Price GUN-45 GUN-46 GUN-47 GUN-48 GUN-49 GUN-50 GUM71 KOYO GMG GMB Universal Joint Pin Universal JointNegotiableMOQ: 1
-
Needle Roller for BearingUS$ 0.06 - 0.06MOQ: 20 Pieces
-
5131.48 Rear Needle Bearing for Peugeot 405US$ 1 - 5MOQ: 500 Pieces
-
High Speed China Supplier Best Drawn Cup Needle Roller BearingsUS$ 0.1 - 100MOQ: 1 Piece
-
AXK Axial Needle Roller Bearing Plane BearingUS$ 0.1 - 0.3MOQ: 1000 Pieces
-
AXK2035 Thrust Needle Bearing, Axial Cage and Roller, Steel Cage, Open End, Metric,Dynamic Load CapacityUS$ 0.1 - 10MOQ: 200 Pieces
-
Japan NTN Needle Roller Bearings NA4902R Original Imported Manufacturing MachineryNegotiableMOQ: 100 Units
-
Bottom Roller Bearing Lz3224 CageUS$ 0.2MOQ: 1 Piece
-
Supply With Non-standard Bottom Roller Bearing LZ22 25*45*29US$ 2 - 3MOQ: 1 Piece
-
Textile Roller Bearing Needle Roller Bearing Lz3224US$ 1MOQ: 1 Piece
