Contact Platform Support
Help Center100kw - 20Mw Medium Head Francis Hydro Turbine for Hydraulic Stations
Related Products
-
High Efficiency Small Reaction Francis Hydro Turbine With Capacity Below 5MWNegotiableMOQ: 1 Piece -
Large Francis Reaction Hydro Power Turbine for Head 10m - 300mNegotiableMOQ: 1 Piece
-
Large Vertical Francis Hydro Power Turbine With Capacity Below 20MWNegotiableMOQ: 1 Piece
-
Vertical Large Francis Hydro Power Turbine for Frequency 50Hz - 60HzNegotiableMOQ: 1 Metric Ton
-
Medium / High Head Vertical Francis Hydro Turbine for 10m - 300mNegotiableMOQ: 1 Piece
Certification:CE
100kw - 30Mw Medium Head Francis Hydro Turbine for Hydraulic Stations
Descrition:
Normally, we adopt the horizontal Francis with capacity below 5MW, runner diameter below 90cm. And the vertical Francis with capacity below 20MW.
The Francis type turbine is mostly suitable for hydropower stations with medium or high head from 10m to 300m. They are in both vertical or horizontal shaft arrangement and could be vastly selected by the hydraulic power stations.
lts feature is that the water flow enters the runner inward in a radial direction , changes direction gradually and then passes out axially. Francis turbine is characterized by reliable operation, simple construction and high efficiency, etc.
Applications:
1. Water head: from 10m to 300m
2. Power: 100kw to 30Mw
3. Frequency: 50hz or 60hz
4. Output Type: 400V, 3.3KV, 6.3KV, or 10.5KV AC three phase,
If you are interest with the Francis turbine, you should send some key parameters (such as net head, flow discharge, unit number, frequency, voltage) in inquiry.
Normally, Medium size and larger Francis turbines are most often arranged with a vertical shaft, Small Francis turbine always arranged with horizontal shaft, but it is not absolute.
Specifications:
|
Type |
Horizontal/vertical Francis turbine |
|
Water head |
From 10m to 300m. |
|
Installation capacity |
From 100KW to 20MW |
|
Runner material |
Stainless steel (0Cr13Ni4Mo) |
|
Generator type |
synchro generator |
|
Auxiliary Equipment |
Governor, Inlet Valve, unit side panel, excitation system |
Competitive Advantage:
HYDROTU is the complete Chinese hydropower equipment supply, consulting and engineering design venture in the field of hydropower equipment. We provide the high quality Chinese hydropower equipment with advanced technologies and integrated services to meet the global hydropower markets.
With our Integrated Services concept, we provide you with customized support from project planning through implementation to plant commissioning and service. Our principle: Customer’s project is our project , customer’s success is our success.
HYDROTU covers the services, complete equipment supply, economic solution of the global hydropower projects and aims to be the best global supplier of hydropower equipment as well as the best integrated services provider on the hydropower markets.
Send Inquiry to This Supplier
You May Also Like
-
Low-Friction Swing Bearing With Sealed Grease Lubrication for Harsh EnvironmentsNegotiableMOQ: 1 Piece
-
Four Point Contact Ball Slewing Bearing 010.30.630.12US$ 1,000 - 50,000MOQ: 1 Piece
-
Slewing Drive for Solar PanelNegotiableMOQ: 5 Pieces
-
Welding Machinery Slewing Bearing/RingUS$ 10 - 360MOQ: 1 Piece
-
Take Two Sides Sealing Ring Single Spherical Roller Bearing 20205MB-2SUNegotiableMOQ: 10 Pieces
-
Sapphire Insulators and TubesNegotiableMOQ: 1 Piece
-
Robot Hollow Rotating Platform BearingNegotiableMOQ: 5 Pieces
-
High Precision Planetary Gear Ring & Internal Gear Processing for Heavy MachineryNegotiableMOQ: 1 Piece
-
Excavator Parts Slewing Bearing Large Turntable Bearing With Internal Gear R320 R320LC-7US$ 1200 - 1245MOQ: 1 Set
-
China Top Wire Outer Spherical BearingUS$ 5.42 - 5.88MOQ: 1 Piece
