Contact Platform Support
Help Center6051 Kapton Film
Related Products
-
Insulation Material Polyimide FilmUS$ 35 - 35MOQ: 1000 Meters -
Insulation Material Kapton Polyimide FilmUS$ 35 - 35MOQ: 1000 Meters
-
Insulation Material pi Film 6051US$ 35 - 35MOQ: 1000 Meters
-
Polyimide Protective Film 6051US$ 30 - 30MOQ: 1000 Meters
-
Kapton Film 6051US$ 35 - 35MOQ: 1000 Meters
Product Name:6051 Kapton film
Polyimide FEP(F46) film (similar to Kapton FN) is made of coating Polyimide film with FEP resin(F46) on one side(FH) or double sides(FHF) and through the sintering process at high temperature, which combines the excellent properties of Polyimide film and FEP resin of high& low temp resistant, radiation resistant, corrosion resistant, excellent electrical properties, superior dimensional stability and heat sealable properties. It performs successfully in the wide range of temperature as low as -112F(-80c) and as high as +500F(+260c). Polyimide FEP(F46) film (similar to Kapton FN) widely used for insulation in motor, electrical apparatus and wrapping of cable and magnet wire, heater manufacture etc.
Characters:
* Higher mechanical strength, better dielectric strength with thinner insulation ply;
* Excellent heat resistance ,used as class- H insulation and can work for a long term at
180°C but short time at 260°C;
* Good flexibility, better tear resistance and excellent workability, and can be glued on the
different-sized workpieces;
* Self-sticking and good bonding strength , no removal after stripping off;
* Different thickness and width to meet customers’ specific requirements;
Application
Electrical and Electronics, circuit board manufactureH grade electric engine, transformer coil and capacitor insulation wrapping up in high-temperature, high-voltage conditionSMT thermal resistance, golden finger protection of PCB boardHigh temperature resistance and waterproof for electronic transformer
Data Form
|
Item |
Properties |
Unit |
Values |
||
|
FH |
FHF |
||||
|
1 |
Thickness |
um |
30~50 |
51~100 |
|
|
2 |
Thickness Tolerance |
% |
10 |
||
|
3 |
Tensile Strength |
MD |
MPa |
≥110 |
|
|
TD |
≥100 |
||||
|
4 |
Elongation at rupture |
% |
≥50 |
||
|
5 |
Breakdown Strength |
Average |
MV/m |
≥160 |
≥130 |
|
Individual |
≥120 |
≥100 |
|||
|
6 |
Peel Strength (FEP–FEP) |
N/25mm |
≥6 |
||
|
7 |
*Volume Resistivity 205c |
Ω·cm |
≥1x1015 |
||
|
8 |
*Surface Resistivity 205c |
Ω |
≥1x1013 |
||
|
9 |
*Dielectric constant (50Hz) |
--- |
2~3.5 |
||
|
10 |
*Loss tangent (50Hz) |
--- |
≤0.004 |
The items marked * are the inherent properties of Polyimide Film, which are not showed on the testing report for outgoing factory.
Note:The values noted in above technical specification are given only for our customers' reference and should not be used in writing specifications.
Specification
1. Other construction is available upon request; FEP layer thickness: 0.01mm 10%
2. Width: 10 ~ 520mm; Core ID:76mm; Roll OD:200~240mm
3. Min Qty: 50kgs each size in a lot.
Our Factory Competitive Advantages
|
*Well Competitive Prices and High Quality Control *Prompt Delivery
*Customer's Design and Logo are Welcome *Fit for Gifts and Premiums
*Earth-friendly Products *In a Variety of Design
|
Packing
The tape roll and disc should be rolled up on a pipe core whose internal diameter is about 76mm, and then the tape roll and disc should be packed into a plastic bag with good sealing, and then be transported into a wooden box with damp-proof paper or into a dry and clean carton.
Send Inquiry to This Supplier
You May Also Like
-
Self-fusing Electrical Silicone Rubber Hose Leak Waterproof High Pressure Plumbing Repair Tape Silicone Self Fusing TapeNegotiableMOQ: 1 Roll
-
Air Conditioner Refrigeration HVAC Electrical Insulation Tape Pvc Insulating Tape PVC Insulation TapeNegotiableMOQ: 1
-
Silicon Rubber Pad Thickness 1.0,silicon Pad for SublimationUS$ 5 - 50MOQ: 10 Pieces
-
Polymeric Insulator Fittings Y Style FittingUS$ 3 - 5MOQ: 1000 Pieces
-
Polyimide TapeNegotiableMOQ: 100 Rolls
-
Fiberglass ProfileUS$ 0.2 - 19MOQ: 3000 Meters
-
Wool Noil / Wool Waste / NoilUS$ 2.7 - 2.8MOQ: 15 Tons
-
SL-4050F Screw In Bus Bar Support Plastic Overhead Line InsulatorUS$ 0.1 - 5MOQ: 100 Pieces
-
Insulation Tape (NPTC-PVC)NegotiableMOQ: 1000 Pieces
-
Flat Polished Chrome Telephone Slave Socket / BlackNegotiableMOQ: 3000 Pieces
