Contact Platform Support
Help CenterMedical Grade Silicone Rubber With 116C / 240F for Closures and Tubing
Related Products
-
Tear Strength 16.0 KN / m High Temperature Resistant Silicone Below 315NegotiableMOQ: 1 Piece -
Tasteless High Temperature Resistant Silicone With Elongation 300% / 250% / 180%NegotiableMOQ: 1 Metric Ton
-
Shore A 60 / 70 2 High Temperature Resistant Silicone With Tensile Strength 8.0 MpaNegotiableMOQ: 1 Metric Ton
-
Eco - Friendly GF571HT High Temperature Resistant Silicone for Below 315NegotiableMOQ: 1 Set
-
GF561HT High Temperature Resistant Silicone With Curing Agents C - 14NegotiableMOQ: 1 Metric Ton
Certification:ROHS、FDA、LFGB
Medical Grade Silicone Rubber with 116°C / 240°F for Closures and Tubing
Product Features:
1)100% medical grade silicone material, in line with RoHS, FDA, LFGB, environmentally friendly, odorless, non-toxic.
2)High transparency.
3)Stable color , non-deforming.
4)Safe organic silicone material, colorless, tasteless, non-toxic, can withstand high and low temperature -50 ~ 200 ℃, disinfection, non-deforming.
Product Use: Mainly used in medical instruments.
Typical Properties
|
1. Properties (except relative density) obtained from 1.905-mm (0.075-inch) thick ASTM slab equilibrated a minimum of 3 hours at ambient conditions. 2. Corporate test method (CTM) procedures correspond to standard ASTM tests in most instances. Copies of CTMs are available upon request. 3. 1.0 parts PERKADOX PD-50S compounded with 100 parts base, molded 5 minutes at 115°C (240°F). 4. 0.5 parts DI-CUP R compounded with 100 parts base, molded 10 minutes at 160°C (320°F). 5. 1.0 parts VAROX DBPH compounded with 100 parts base, molded 10 minutes at 171°C (340°F). |
Selected Qualification Data for Dow Corning Class VI Elastomers
|
1. Elastomer was compounded with 50% 2, 4-dichlorobenzoyl peroxide at 1:100 ratio. Unless otherwise noted, samples were molded 5 minutes at 116°C (240°F) and post-cured 2 hours at 177°C (350°F). Elastomer samples were autoclaved before all biocompatibility tests. 2. Tests meet ISO 10993-1 requirements for surface devices with limited (<24 hours) or prolonged (1 to 30 days) contact duration. 3. European Pharmacopoeia monograph 3.1.9: Silicone Elastomer for Closures and Tubing. Samples were molded 5 minutes at 116°C (240°F) and post-cured 4 hours at 204°C (400°F). Samples were not sterilized prior to this testing. |
Send Inquiry to This Supplier
You May Also Like
-
Covestro PC Makrolon 2407 2807 Polycarbonate PC Plastic Granules PC Resin Raw Material Covestro 2407 2807US$ 1.8 - 2.2MOQ: 25 Kilograms
-
Plastic Raw Material LCY SEBS Powder 7550UUS$ 1.2 - 1.5MOQ: 25 Kilograms
-
Leandre Basel PP8623 Food Grade High Impact Lightweight Environmental Material PP Polypropylene Pellets PP H5416US$ 1.10 - 1.30MOQ: 1000 Kilograms
-
Low-Friction PTFE Powder for Automotive Bearing ManufacturingUS$ 10 - 30MOQ: 100 Kilograms
-
Economic Interlocking Horse and Cow Stable Mat Made of Rubber or EVAUS$ 13.5 - 35.4MOQ: 100 Pieces
-
SAP Super Absorbent Polymer for Sanitary Napkins or DiapersUS$ 1.5 - 2MOQ: 1000 Kilograms
-
Slip Additive Masterbatch With PE CarrierUS$ 2.3 - 2.5MOQ: 500 Kilograms
-
UHMW PE Powder for Lead-acid Battery SeparatorUS$ 2,750 - 2,850MOQ: 1 Ton
-
Pet Flakes Hot Wash / Pet Flakes Chip / Hot Washed Pet FlakesUS$ 650 - 680MOQ: 22 Tons
-
PP/ HDPE/ LLDPE VIRGIN & RECYCLED, PE, PPCNegotiableMOQ: 25 Metric Tons
