Contact Platform Support
Help Center3m Length Mining Monorail Switch Realized via Pull Cable (manual)
Related Products
-
Monorail Turnouts, Monorail Switches With Car Arreste Prevent Locomotive Slide RailNegotiableMOQ: 1 Piece -
Monorail Switch Air Supply Pressure (pneumatic) 0.5 - 0.8MPa for I155 TrackNegotiableMOQ: 1 Set
-
Industrial 0.5 - 0.8MPa Mining Monorail Switch Apply to I155 TrackNegotiableMOQ: 1 Set
-
Turnout Junction, Monorail Switch With Manual and Pneumotronic Operation 0.5mNegotiableMOQ: 1 Piece
-
1.2m Width Monorail Turnout Junction, Monorail Switches With Car Arrester Apply to TrackNegotiableMOQ: 1 Piece
Certification:ISO9001
3m Length Mining monorail switch realized via pull cable (manual)
Specifications:
|
Max. Length |
3m |
|
Max. Width |
1.2m |
|
Max. Height |
0.5m |
|
Angle |
16° |
|
Air cylinder(pneumatic) |
1 |
|
Air supply pressure(pneumatic) |
0.5-0.8MPa |
Description:
Monorail switch is a mechanical installation enabling monorail locomotives to be guided from one monorail track to another.
Control of the switch is realized via air cylinder (pneumatic) or bowden cable (manual). To prevent the monorail locomotive or other devices transported on the monorail slip off from the track, each branch is equipped with kick-up block.
Switch is to be used with I155 monorail line.
Competitive Advantage:
The moment encountering more turning angle , it may realize through the curved rail track, and its own open bifurcation angle is 16 degrees. The turnout junction is equipped with car arrester to prevent the locomotive slide from overhead rail, when reversing does not reach the designated position. There are 2 specifications (manual and pneumotronic operation) for choice of mine-manager. About the pneumotronic operation turnout junction, the source supply is common 0.5-0.8MPa, which is with the oil-water separator.
Send Inquiry to This Supplier
You May Also Like
-
High Precision Ground Gear Spline Shaft With MTC 42CrMo4 Spline Shaft for Textile MachineryNegotiableMOQ: 1 Piece
-
Clamp Collar Single-split Made of Stainless Steel 1.4301, Bore 18mm With Bolt DIN 912NegotiableMOQ: 1
-
Nonstandard Drive ShaftUS$ 30 - 500MOQ: 1 Piece
-
ISO Certified Professional Custom OEM Pump Shaft Sleeve Axle SleeveUS$ 1 - 3MOQ: 1 Ton
-
Customed Axle CoverUS$ 0.01 - 0.9MOQ: 1000 Pieces
-
Forged Crank ShaftUS$ 1 - 100MOQ: 10 Sets
-
Gear ShaftUS$ 5 - 30MOQ: 500 Pieces
-
Agricultural Pto Shafts/cardan ShaftNegotiableMOQ: 1
-
Machine CrankshaftUS$ 30 - 300MOQ: 100 Pieces
-
Precision Machining Aluminum Shaft CollarUS$ 2.5 - 50MOQ: 1000 Pieces
