Sell EL Wire Rope Lamp Neon Lighting (China (Mainland))

Technical application instruction for flexible neon wire(el wire) Patent no.: Zl01251151. X Lighting theory: Technology of electroluminescence(el), to work under function of electric field. Basic structure: Following from the center to the outside are respectively the first electrode(copper wire), lighting layer(el phosphor material), the second electrode( 2 fine copper wire), and colorful plastic layer(pvc tube). 1. Coloful plastic layer 2. Lighting layer 3. The first electrode 4. The second electrode Tech data Power 0.4-0.8 w/M brightness 5-100 CD/m2 Standard type 1.0-5.0 mm operation current 6-15ma Average application lifetime 5000 hrs shape round, quadrate, with drape Maximum length 100 M weight 4-18 g/M Operation temperature 40 - + 60 color: Red blue green orange white Application requirements inverter/driver be matched input: DC 3v,6v,9v,12v,24v AC 220v,110v Output voltage 90 150v frequency 800 2000hz Connecting operation instrucrtion 1. scrape away the plastic layer, make the lighting layer and 2 fine copper wire(the second electrode ) exposed, then scrape part of lighting layer, make the first copper electrode exposed. 2. Separate the two copper electrodes, splice them with two electrodes of common wire respectively, seal each of the joint with pyrocondensation tube, pay attention to avoid short circuit. 2. seal the joint with pyrocondensation tube again, keep it insulating and humid - protective with glue. 4 EL wire joint method is same as the above. Matters needing attention: 1 el wire are prohibited to be joined with household outlet directly without inverters connection. 2 el wire are not allowed to be cut under the electric working condition, electrode in the cutting joint may have short circuit, keep the joint sealed and waterproof. 3. Different length of EL wire should be matched with appropriate drivers, otherwise drivers would be damaged thus causing danger. 4 animated effect are achieved by the control of drivers. 5. Try to avoid EL wire being bent, folded or stretched repeatedly when during installation. 3. rough transportation may injure the product, turn off the power immediately and return it back to suppliers when EL wire been found heat. 4. keep corrosive and flammable items away from product application environment to avoid unexpected danger. 5. instructions should be given by professionals during installation. *danger would arise in case of violating the above warning, inverter and EL wire would also be damaged.