Once Toilet Seat

Brief description:

1. The Hygienic Toilet Seat is suitable to the shared public toilet.

2.With charger connector on the seat.

3. Wireless infrared sensor control.

4. Indication light, when voltage is very low, the light will flash to signal a charge of battery.

5. Delay 8 second for the next starting.

6. Voltage: 100V-240V

7. With A/C and D/C power supply.

8. With rechargeable battery.

9. Match with 60 uses film wrap.

10. Film wrap:HDPE

How it works:

By shaking your hand, the Hygienic Toilet Seat will turning a film wrap and cover around the mat. The film is only one time used and the used film is destroyed by a cutter.hand, the cover film wrap will stop exactly after one round. The film is only one time used and the used film is destroyed by a cutter. hand, the cover film wrap will stop exactly after one round. The film is only one time used and the used film is destroyed by a cutter.

How to replace the film wrap:

1: place a new roller on the right side .

2: pull the film through the mat.

3: Pull the film wrap to the end of the right side, then keep the film wrap under the shaft.

Structure of Hygienic Toilet Seat:

Main units: the hygienic roll, the accumulator, the circuit board, the transformer, the oil pressure cover, the cover seat, the button, the microcomputer controller, ABS outer covering, a Sensor.

1.The accumulator: the output voltage is 6V and the service life is more than 3 years. Being charged for 3 hours, the accumulator can offer the power to the motor more than 2000 times.

2.The circuit board: It is water-proof .

3. The hygienic roller: with the dissoluble cover film, it is an environment-protected product that has a loading capacity of 3KG.

Package Standard: