Vertical Composite Crusher

Introduction:

Vertical compound crusher is a newly-developed type of grinding machine which integrates crushing technology of the same kind both at home and abroad, do optimum design of the technical parameters. It is mainly adapted to medium-sized raw materials and clinkers, which provides an ideal triturate devices for technical Improvement of cement factory or building a new cement production line, it also can be used for crushing iron mineral, sand rock, gypsum, blast furnace slag, coal gangue, lump coal and other kinds of medium-hard minerals. It has these following features: big crushing ratio, low energy consumption, stable operation, simple structure, easy to fix and maintain,etc.

This crusher has big breaking ratio, discharging size is adjustable, don't suffer from the wear of plate hammer and the plate, it is not easy to plug when crushered high moisture, large mud containing materials; Using elastic and regulatory stucture, the material which can not brken, they will be automatically discharged, it can’t make the damage to equipment; the bearing is horizontal and with long life, it can break high temperature materials (such as cement clinker); unique rotor structure, when break materials, the rotor body is virtually non-wear; the behind Cavitiy set-up screwrod or hydraulic open structure, do not need main equipment you can easily replace the easywearing parts.

Working principle:

Materials fall into the high-speed rotation impeller from the above of machine, under the action of high-speed centrifugal force, have high-speed impact with another umbrella form materials which flow around the impeller, after they attack each other, then discharged from the bottom, it forms close-circuit and with many times circulation, it can achieve the required product size by screening equipment controlling.

Features:

1.simple structure, low operation cost. Using the principle of stone strike stone, smaller wear.

2.broken rate is high, energy conservation

3.with fine, coarse grinding function

4.little affected by material moisture content, humidity can reach 8%.

ing noise is less than 75db, less dust pollution.

6.suitable for breaking medium hard, especially hard materials.

ducts are cubic, packing density is big, a very small iron pollution

8.little wearing of the impeller, easy maintenance.