White Alkaline Fiberglass Reinforcing Mesh for Roof Waterproofing

Fiberglass mesh

Fiberglass Mesh is woven by fiberglass yarn as its basis mesh, and then coated by alkaline resistant latex.It has fine alkaline-resistant, high strength, etc.

Roll Size:1mx50m;

Mesh Size:4x4mm, 5x5mm, 10x10mm...

Weight:145g/m2, 125g/m2, 165g/m2, 75g/m2...

Color:white, blue, green, orange, yellow, ect.

Fiberglass Mesh is based on the middle-strong alkaline or non-alkaline fiber-glass loom-woven fabric and finished after being coated with an organic material. It features a strong alkali-resistant and a high strength. Mainly used in the wall warmth-keeping surface decorative system, a reinforcement for the material stratum water-proof system and as the reinforcement for the natural stonematerials...etc. It is an ideal material for building engineerig. It is widely used in wall reinforcement , outside wall heat insulation, and roof waterproofing. It can also reinforce cement, plastic, bitumen, plaster, marble, mosaic and other building materials.

Feature:

1) Width: 1000mm.

2) Roll length:50m, 100m, 300m as per the customer requirement

3) Mainly Mesh Size: From 4 x 4mm To 10 x 10mm.

4) Mainly density from:60g/m2 to 300g/m2

5) Color: white, blue, orange and so on. All kinds of color could available

6)Packing:Inner packing:each roll is packed in shrink-wrap film or plastic bag then put on the Carton. Out pack could use Pallet if need it

main use:

fiberglass mesh is widely used in wall reinforcement , outside wall heat insulation, and roof waterproofing. It can also reinforce cement, plastic, bitumen, plaster, marble, mosaic and other building materials.

weight for per square meter
    
5mm x 5mm :75g/m2, 90g/m2, 125g/m2, 145g/m2, 160g/m2, etc.

4mm x 4mm :75g/m2, 90g/m2, 110g/m2, 125g/m2, 135g/m2, 145g/m2, 160g/m2, etc.

10mmx10mm :90g/m2, 110g/m2, 125g/m2, 135g/m2.145g/m2, 150g/m2, 160g/m2, 200g/m2 etc.