Solar LED Light

Model: TS-JTD019

01. Solar Panel: High-efficient monocrystalline silicon solar panel, 6W, 305mm*190mm*25mm tempered-glass laminate.
02. Storage battery: Ni-MH battery: 9.6V/7000mA.
03. Light source: Self-designed with special efficiency, total 140 pieces of φ 10 LED, using 110 pieces of 15000 mcd/Red LED(type), using 30 pieces of 2200 mcd/Blue LED(type), (the middle part can be replaced by green or white LED according to the requirement)vacuum aluminum & lens reflector can enjoy the super-lighting.
04. Electrical specialty:
4.1 Power mode:
---- Storage battery supply.
----100-240V alternating current supply.
---- Dry battery (vehicle power) supply.
4.2 Charge mode: Solar energy; Speed recharge by alternating current.
4.3 Switch among the three modes by a flick on the button.
---- Rotation light.
----Alternating light by turns.
----Flash light.
----Switch order: Rotation light ->Alternating light->Flash light->Stop.
4.4 Light Frequency
----Rotation light: Under the Standard mode, the inner circle light on or off with the rate of 75 times/minute, for the outer circle, every opposite two cells light up with the rate of 100 circles/minute; Under the Save mode, the inner circle light on or off with the rate of 100 times/minute, for the outer circle, every opposite two cells light up with the rate of 100 circles/minute.
----Alternative light by turns: Both inner and outer circle light on or off by turns, 100± 10 times/minute
---- Flash light: Take inner 3 LED and middle 12 LED of the inner circle as A, take the outer 15 LED of the inner circle as B and C is the outer circle. Light-up in the order like A->B->C->A with the rate of 100 times/minute.
05. Work mode: Switch to the standard or save mode by mandatory on-off, under the Standard mode the body LED light on or off in blue while in the Save mode, the body LED light up or off in green.
06. Power mode: AC supply with priority, in the condition of AC100V and without save mode, the body LED light on or off in red with the rate of 40± 4 times/minute.
07. Material: Transparent PC+ yellow & black PE.
08. Available Temperature Range (Degrees): -10° C~+70° C.
09. Storage Temperature Range (Degrees): -20° C~+40° C.
10. Anti-water: Wet rainy and waterproof.