Oxygen Jet Facial Beauty Equipment XM-Y7

Oxygen Jet Beauty Instrument XM-Y7

1.Oxygen spray treatment
2.Lymphatic drainage treatment
3.Injection

Parts introduction:

Oxygen injection (Do with the nozzle) To choose the suitable essence according to the different skin. The jet can whiten and moisten the dry skin or thin the pore and control the grease of the greasy skin.

Notice: turn the pressure to 2LPM when doing the oxygen injection. The time for the whole face to inject the oxygen is 30 minutes. And do it from the forehead to the chin. For the skin in the eyelid is much thin, try one’s best to avoid this place when doing the operation

Oxygen inhalation ( Do with the facial mask) Put pure water into the glass, open the oxygen delivery function, put the oxygen facial mask on the nose and inhale the oxygen. Then do the mask-film nursing.

What it will be when the human lack of the oxygen? Oxygen shortage of the brain dizzy, headache, tinnitus, nausea, nervousness, breath hard, unconsciousness till die. Oxygen shortage of the skin: the weak metabolism of the skin, roughness, width of the facial pore, tiny wrinkles, fleck, black circles of the eyes, dark and light color of the face, etc.. Lots of girls’ skin become dry, without shine or elasticity for the oxygen shortage, though they are young enough.

Notice: Turn the pressure to 3LPM when doing the oxygen inhalation.

BIO skin-pulling wrinkle-dispelling

1.Press “START” button to start.

2.Press the “ENERGY” button to adjust the current level (0-30).

3.Press the “TIMER” button to set the time for BIO.

4.Press “F3” button to start, then put the double stick along skin tissue. ( It must two sticks contract at the same line but not exceed eight seconds).

 

Technical parameters:

Voltage: 220V /110V

Power:370W

Pressure output: 0.04Mpa

Oxygen Flux:1-5L/min

Oxygen concentration:≥90%