Contact Platform Support
Help CenterHYDX-4 Full Hydraulic Drilling Rig
Related Products
Certification:CE
I．Brief Introduction
The core drill rig of full hydraulic and rotator adopted the technology of wire-line coring has been the dominant type rig for solid mineral deposits prospecting in developed counties in the world. It is also the developing direction of drilling technique and drilling equipment in China.
HYDX-4 core drill rig successfully according to the situation of China. This type of drill rig could substitute imported products. It could be applied to exploration and prospecting of geology, metallurgy, coal, petroleum, natural gas, groundwater and other industries. The drill rig is equipped with a series motor driving pump. The feeding and lifting of rotator are driven in the structure of cylinder directly pushing, with a 3.5m(11.5 feet) stroke. The rotation of spindle is driven by a single engine. It has four mechanical shifts of range of speeds, and the speed could beadjusted hydraulicly with stepless change.
The rig is simple in structure. It is light and easy for transference;the mast has the functions of sliding and touching ground; the spindle lifted and lowered with hydraulic cylinder; it could be folded for transport and relocation. The spindle hole is in large diameter.
The rig is simple in structure. It is light and easy for transference; the mast has the functions of sliding and touching ground; the spindle lifted and lowered with hydraulic cylinder; it could be folded for transport and relocation.The spindle hole is in large diameter.
II. Main Parameters
The figures in these tables have been calculated, based on field experiences, and may be reasonably expected.Actual drilling capacity will depend on in-hold tools and conditions, drilling techniques and equipment used.
|
Diesel Engine |
Model |
Cummins 6BTA5.9-C180(turbocharged and charge water cooled) |
|
Displacement |
5.9L (1.56 US Gallons) |
|
|
Power |
132Kw (180HP) |
|
|
Rated RPM(Factory setting) |
2200rpm |
|
|
BQ |
1000m(3280feet) |
|
|
Drilling Capacity |
NQ |
700m(2296 feet) |
|
HQ |
500m(1640 feet) |
|
|
PQ |
300m(984 feet) |
|
|
Rotation Motor |
Hydraulic Motor-variable Maker: SAUER-DANFOSS |
|
|
RPM |
Four Shifts/ Stepless Change 0-1100 RPM |
|
|
Ratios |
1st 14.422:1 2nd 8.171:1 3rd 4.519:1 4th 2.652:1 |
|
|
Drill Head |
Head Opener |
Pivoting style, Manual actuated |
|
Hydraulic Chuck(PQ) |
Hydraulically opened, Disc Spring Clamping, Normally C Closed Type Axial Holding Capacity of 222 400 N |
|
|
Max. Torque |
3700 N·m(2727 lbf·ft) |
|
|
Hold Diameter |
121 mm(4.76 inch) |
|
|
Max. Lifting capacity of Spindle |
150 kN(33720 lbf) |
|
|
Max. Feeding Power |
60 kN(13480 lbf) |
|
Primary Pump |
Hydraulic pump Axial Piston variable displacement Triplex pump for driving of rotator, winch mud pump & leveling jacks. With load sensing system. |
Maker: DANFOSS 1st Pump：148LPM at 31.5MPa 2nd Pump：120LPM at 28MPa 3rd Pump： 50 LPM at 16MPa |
|
Hydraulic Tank |
Capacity |
310 L (82 US Gallons) |
Send Inquiry to This Supplier
You May Also Like
-
Woodworking Machine/cnc Router/cnc Wood RouterNegotiableMOQ: 1 Set -
Telescope SawhorseNegotiableMOQ: 1 Piece
-
4 Side Moulder Steel RollerNegotiableMOQ: 100 Pieces
-
Hot Sale Forestry Quenching Wood Planer BladesUS$ 5.1 - 6.1MOQ: 500 Kilograms
-
High Performance Cemented Tungsten Carbide Planer BladeUS$ 6.26 - 90MOQ: 5 Pieces
-
DRY TONGYOU Vacuum Pump for CNC Router 1325, Vacuum Pump for CNC Engraving MachineNegotiableMOQ: 1 Set
-
Double End-cutting Saw FU-48BUS$ 44,800 - 45,000MOQ: 1 Set
-
High Efficency With Double Heads CNC Router Engraving MachineNegotiableMOQ: 1 Set
-
High Quality Axis Guide for TurningUS$ 0.25 - 0.3MOQ: 1000 Pieces
-
TCT Saw BladeUS$ 5 - 30MOQ: 500 Pieces
