Intelligent Battery Monitor

BATTERY MONITORING SYSTEM

Intelligent Battery Monitor

• Continuous 24/7 on-line monitoring

• One CELLCHECK monitor one cell, including internal resistance, voltage and temperature

• Software is available to collect data from CELLCHECK

• RS485 port with Optical isolation, meet MODBUS protocol, easy to access UPS controller

• Easy to install without specialized training

Overview

CELLCHECK intelligent battery monitor is Huasu   introduced specifically for single cell design of products. CELLCHECK combines the advanced technology with patented for the most thorough stationary battery health analysis in the industry.

Features

• Full resistance, battery temperature and voltage monitoring for comprehensive battery state of health analysis

• String voltage, string current and ambient temperature monitoring(need VCT unit)

• Automatic analysis of battery condition to estimate remaining battery capacity, indicating that the battery needs replacement or maintenance

(need CM unit)

• With a certain amount of storage space for history data

• Panel light flashes and can be read from the RS485 port when warning

• All operating parameters can be set by RS485 port

• Use software to manage multiple strings, check real-time alerts and historical data

Specifications

Environmental

Operating temperature:-5℃~50℃,5%~90%RH

Storage temperature: -10℃~70℃,5%~90%RH

USE FOR

2V,6V or 12V battery, capacity from 30AH to 1000AH

Power Requirements

CELLCHECK:powered from the battery,less than 60mA(2V) or 30mA(12V)

VCT unit:DC10~35V

CM unit:DC10~35V

Protection

Test load and power paths are fused, reverse polarity and overvoltage protection for power input

Measurement Range & Accuracy

String voltage:20~600V,0.5%+0.2V

Cell voltage:1.5~2.5V,0.1%+1mV

             7~16V,0.1%+10mV

Internal resistance:100~65535uΩ

2%+3 uΩ(2V battery, repeatability)

2%+30uΩ(6V,12V battery, repeatability)

Temperature:-10℃~+70℃, 0.5℃

String current:0~100A(optional), 2%+0.5A

Communications Interfaces

CELLCHECK:RS485, meet MODBUS protocol, support 200 devices on each bus

CM unit:RS485, Ethernet 10/100 Mbps, meet

MODBUS protocol

Insulation  

2000VAC

Installation

Paste on battery or rail mounting

Weight

CELLCHECK: 135g

Options

1. VCT unit

  Use to monitor string voltage, current and temperature.

2. CM unit

  Use to manage up to 10 strings and 200 cells each string.

3. Current sensor

  Use to monitor string current with VCT unit.

4. LCD unit

  Use to read data from CM unit and display.

5. Software

  Software can be installed on PC and read and display data from CM unit.

Applications

• UPS

• Telecommunications

• Battery supplied applications

Utilities

• Fire &Safety system

• Remote monitoring

Shaanxi Foresight Electronics Co.,Ltd.

Tel: (0086) 029-68995523

FAX: (0086) 029-87261871

Email: jerry@fo-sight.com