Semi-automatic Laminator

1. Semi-automatic laminator Introduction
(1) flexible operation, manual, automatic could be adjusted according to the manufacture.
(2)controlled by PLC, Multi-networked, centralized control.
(3)heating with oil, a more uniform temperature.
(4)Many kinds of warn & emergency response system to keep reliable operation.
(5)High vacuum, to ensure product quality.
(6)Special structural design & flat plate to avoid displacement and debris.
2. Semi-automatic laminator parameters
Temperature evenness:≤2℃
The precision of temperature control:≤1℃
The extension of work temperature :30 to 180 ℃
Exhaust velocity:30L/S or 70L/S
The working vacuum degree:200-20Pa
Height of laminating:20mm
Working Power:15KW
Air pressure needed:0.5-0.8Mpa
Pumping time:5to6 min
Power source:AC380V,Three-phase Four-wire system
Use environment: Ambient temperature 0 to 50 ℃, Humidity<90%, Elevation
If you are interested in the Semi-automatic laminator ,pls contact us.