Large Portable Rockwell Hardness Tester

Features

Can accurately test large and medium size workpieces on site.

The testing principle and accuracy meet the requirements of ISO 6508 and ASTM E110, tested by National Institute of Metrology and the error is within 1.0HRC, same as the bench

type.

First clamp the workpiece, then apply the test force, stable testing with high repeatability and precision.

Used for large and medium size moulds, shafts, rollers, tubing and all kinds of metal parts.

Used for production inspection and acceptance inspection, replacing Leeb hardness testers with lower precision.

Traceable standard hardness block.

Indenter inspected with standard Rockwell hardness tester.

Test force calibrated with load cells directly traceable to China national secondary benchmark.

Application

Large hardness tester is very stable with fine repeatability, but the operation is not as simple as small ones.

Large hardness tester can be applied to large and medium sizeparts. When the workpiece is not suitable for the magnetic hardness tester, the best way is to test with large hardness testers.

The large hardness tester is recommended to test the workpieces that can be tested by the small testers with 4 inches opening size.

Main Technical Parameters

Standard Package

1 Tester
1 Diamond indenter (120°cone)
1 Ball indenter (Φ 1.588mm)
1 Flat anvil
1 V anvil
3 Standard Rockwell hardness blocks
1 Spare magnifier
1 Carrying case

Optional

Diamond indenter
Steel ball indenter(1.588mm, 3.175mm, 6.35mm,12.7mm)
Standard hardness block
Spare magnifier

 Model Selection

REMARKS: The first number in the model specification means the biggest opening width(inch), the second number means the biggest opening depth(inch).