Energy Absorber YL-E501

Specifications

Feature:

The energy absorber is a component of personal fall arrest equipment and complies with EN 355.

YL-E501

1. Energy Absorber

2. Material: 100% polyester

3. With 1 forging D-ring and 1 middle snap hook

4. Meet EN355  

Attention:

Energy absorber should be used along with full body safety harness.

The maximum length of energy absorber including attached lanyard would be 1.8 meters. The energy absorber can increase the deceleration distance 1.38 meters. Before using, please make sure that fall space permits using an energy absorber. Linked to point must be higher 6 meters than ground.

1.The energy absorber with lanyard must only be connected to front or back attaching point of full body harness.
2.It is strictly FORBIDDEN to connect the energy absorber with lanyard to the work positioning belt.
3.It is strictly FORBIDDEN to additional element between the energy absorber with lanyard and the structural ancher point.

Similar products:

Admissible time of use:
The energy absorber can be used for 5 years, counting from the date of putting the device into operation.
After 5 years of usage the energy absorber must be withdrawn from use and destroyed.
The energy absorber must be withdrawn from use immediately and destroyed when it have been used to arrest a fall.

Packaging:

Each piece in color box, non-woven bags packaging or as you required. Popular packagings are as follows: