Stencil SMT Accessories

Joining is accomplished without any tools or fixtures, with precise pitch spacing,using convenient, pre-cut lengths of tape.T0181 Tape connectors: 1) 1000pcs/box or 1000pcs/roll2) Color: light yellow or deep yellow3) The cover tape is securely joined and can be peeled off continuously across thejoint. T0188 Guide splice tape:1) Available for 8mm SMD tapes; innovative with guidance fixture; 500pcs/box2) Both for paper and plastic carrier tape, following items are proved to be effective and reliable at the low cost3) When aligning two carrier tapes with our reference line, splice tape will be no deviation over the connected tapeP0481 stencil wiper:1) Dimensions: 4 x 4", 6 x 6", 9 x 9", 12 x 12", 8 x 8"2) Ideal for use with delicate equipment3) Each wipe is effective both as a dry wipe and in conjunction with our cleaningchemistries. Packing: Non-woven stencil wiper: 300 or 1,200pcs/boxWoven stencil wiper: 150 or 600pcs/boxP0483 stencil roll:1) Each are made with the most absorbent and durable wiping fabrics available and are especially low linting2) Wiping with SmartRolls prevents smearing, bridging, solder balls, which providesunmatched durability and absorbency for paste, solvent and adhesive removal.S0281 splice clip: Brass shims with holes used with the tape-splicing tool. The shim includes holesto allow the material to go through the sprocket wheel of tape feeder, and pointsto secure it to the carrier tape. Supplied in boxes of 4,000 pieces, and can beused with any width tape. Packing: Standard packing producing area:Shenzhen of China payment:T/T 100% in advance supplying capacity:Good