NEW FACTORY SEAL 51309276-150 Honeywell Dcs

Contact name:Sandy Lin

Whatsapp/skype/Phone number:86-18020776786

Email:unity@mvme.cn

With oil prices of $100 a barrel or more, even more difficult-to-access sources have become economically viable. Such sources include tar sands in Venezuela and Canada, shale oil and gas in the US (and developing elsewhere), coal bed methane and synthetic diesel (syndiesel) from natural gas, and biodiesel and bioethanol from biological sources have seen a dramatic increase over the last ten years. These sources may eventually more than triple the potential reserves of hydrocarbon fuels. Beyond that, there are even more exotic sources, such as methane hydrates, that some experts claim can double available resources once more.

 About Macro Keys The “A”, “B”, “C” or “D” keys can be used to automatically activate a series of commands of up to 16 keystrokes, if programmed for this function. These keystrokes, as a group, are called “macros” and are stored in the system's memory. • Typical macro functions can include: - Arming sequences: STAY, NIGHT-STAY, INSTANT, or AWAY - Bypassing particular zone(s) - Activating relay(s) for turning on (or off) lights, fans, etc. • Up to four macros can be assigned – but no more than one macro to a key. • Macros can be activated only by users with authority levels authorized to perform the macro’s function. NOTE: The installer must activate the desired function key (using *57 Function key Menu Mode) before macros can be assigned. See the chart at the back of this manual for the key(s) assigned for macros. 1. + [#] + [6] + [6] (Master Code) Alpha Display: ∗∗∗∗DISARMED∗∗∗∗ READY TO ARM 2. Enter the macro number (1-4) to be programmed at the “Select Macro?” prompt. Remember, only one macro can be assigned to each key. SELECT MACRO 1-4 0 3. If a macro has been previously defined, the keystrokes are shown on the bottom line of the display; otherwise the display is blank. To exit this mode (and keep the existing macro definition), press any key except the [∗] key. The system returns to normal mode. To define a macro for the selected key, press [∗] and continue with the next prompt. MACRO DISPLAY Enter the first of the series of desired commands, (do not include your master code), then press/hold the “D” key for at least two seconds to complete the first command. This key terminates each command, and appears as an “F” in the keypad display

 NACHI AUXL111C-AO

 NACHI AW10T-SRUNIT-01

 NACHI AXTPDD0N-EC08

 NACHI AXTPFD0T-EC10

 NACHI BUY222

 NACHI CUXL111B-AO

 NACHI DUX111

 NACHI DUX111B

 NACHI DUXL111

 NACHI DUXL112

 NACHI DUY222

 NACHI FJK2005A

 NACHI FJK7002A

 NACHI N80-MP2

 NACHI N83-PC

 NACHI PSUA60B

 NACHI PSUD60

 NACHI RAX11

 NACHI RAX11-A

 NACHI RAX11-C

 NACHI RAX13C

 NACHI RBX1100

 NACHI RBX1100G

 NACHI RBX1120

 NACHI RBX1120G

 NACHI RFX1100-03

 NACHI RFX1100G

 NACHI RFX1100G-03

 NACHI RFX1140TC

 NACHI RIX1120

 NACHI ROP301

 NACHI ROP501

 NACHI ROP601

 NACHI ROP601-10

 NACHI RTC001A

 NACHI RTC003

 NACHI RTC200

 NACHI RTC221

 NACHI RTC301

 NACHI RTP101

 NACHI RTP151

 NACHI SUA301C

 NACHI SUA451B

 NACHI UM098A 14-90093097

 NACHI UM098B 15-91120087

 NACHI UM104/UM887

 NACHI UM116

 NACHI UM116C

 NACHI UM119B

 NACHI UM127

 NACHI UM134A

 NACHI UM136

 NACHI UM801B 12-90092721

 NACHI UM802C 14-90101393

 NACHI UM802E

 NACHI UM803A

 NACHI UM803A/UM080

 NACHI UM806A

 NACHI UM806C

 NACHI UM812C 1B-90101525

 NACHI UM820 13-90100936

 NACHI UM820A

 NACHI UM836C

 NACHI UM837A

 NACHI UM839A 12-90102731

 NACHI UM858

 NACHI UM860A

 NACHI UM860B

 NACHI UM870B

 NACHI UM870B/UM871A

 NACHI UM870C

 NACHI UM870C/UM872

 NACHI UM870C/UNKNOWN

 NACHI UM870D

 NACHI UM870D/UM871A

 NACHI UM873C/UM858

 NACHI UM873D/UM858

 NACHI UM880A

 NACHI UM880B

 NACHI UM883A/UM884A

 NACHI UM887/UM104

 PANASONIC AKP00006

 SANYO DENKI 27BA030FXT30

 SANYO DENKI 27BA100FFT30

 SANYO DENKI 65AA015FXR00

 SANYO DENKI BA075AFWTA22MF

 SANYO DENKI BP100RX

 SST 5136-DNS-200S

 TEXAS INSTRUMENTS 305-03DM

 TEXAS INSTRUMENTS 500-5051

 TEXAS INSTRUMENTS 500-5864A 2459389-0001

 TEXAS INSTRUMENTS 5TI5010

 TEXAS INSTRUMENTS 6MT33

 TEXAS INSTRUMENTS 6MT50-1

 TEXAS INSTRUMENTS 6MT50-2

 TEXAS INSTRUMENTS 7MT902