high quality safety gumboots

Specifications

1.rubber safety boots
2.Injected dual density PU outsole
3.CE, EN, S1P
4.Size: 35-46
5.factory price, fast delivery

fashion men rain shoes:

 

1. Description :
Upper : boots in pigmented split leather
Lining : polyamide on EVA
Insock: : removable, non woven on EVA with arch foot support
Outsole : injected, dual density polyurethane.
Puncture-proof sole & Shock-resistant and crushproof toe cap (200J)
Energy absorber heel
Oil resistant bottom assembly
Anti-static protection
Slip-resistant sole for smooth and oily industrial. 
 
2. Instructions for use:
General use safety footwear for smooth and oily industrial-type floors or loose ground, for indoor or outdoor use provided
a general use against intermediate risks equipped with a protective toe cap providing protection against shocks equivale
200 joules and against crushing risks under a maximum 1500daN load. Safety footwear with closed back, antistatic protect and energy absorbing heel (S1 marking*) 
 
3. Limits to use:
Not to be used for protection against further hazards than defined above. The guarantee can only be applied
optimal-condition shoes, being used without adding up any accessories likely to generate a change in protection, or it can
be applied when its use is not specified in the current instructions for use. This footwear contains no substances known
cause allergic reactions in people with allergic sensitivities. 
 
4. Instructions for storage:
To be stored in its original packing in a dry place, sheltered from sun light. 
 
5. Instructions for cleaning / maintenance:
After any use, leave unpacked shoes in a ventilated place away from any heat source. To remove clay and dust, use a
metallic brush. For stains, use a wet cloth with soap if necessary. To shoe polishing, use a standard product.

 

6. Performances :
Comply with the requirements of the European Directive 89/686, special for ergonomics, harmlessness, comfort, airing
flexibility and with the requirements of the European standards EN ISO 20344:2004 / A1:2007 and EN ISO 20345:2004
A1:2007 S1* SRC (Resistance to slipping
on Ceramic and Steel floors, for all types of hard floors for multiple uses indoors or outdoors).
 
• EN ISO
20345:2004/A1:2007
Specifications on safety shoes for professional use.
S1 : Additional special requirements
SRC : Resistance to slipping