BML-10V Gravure Printing Ink Viscosity Controller

Gravure Printing Ink Viscosity Controller

Technique Parameters:

Type: 760*350*280mm

Control Range:NO.3:13~30s

Circulation volume:3.9~15 L/min

Air Consumption:40L/min

Function Specification:

The machine is suitable for printing industry to automatically dilute the viscosity of the ink, and glue.Easy to use , no need manual adjust the ink,only need to set the viscosity value,according to the product requirement. Pulse detector testing viscosity, Pneumatic diaphragm pump cycle ink and glue. Safe&reliable, accurate detection of viscosity. Using viscosity controller automatic tracking& monitoring to make the viscosity consistent when printing, lamination, coating 

Product function and feature:

1. Single unit can complete printing ink circulation, mixing, viscosity control

2. Improve the printing color consistency, greatly reduce the defect and guarantee the quality of the products

3. Timely to add solvent, sharply reduce the ink consumption  up to 15 ~ 20%, effectively reduce the printing cost

4. Accurate control of viscosity, printing operators do not need to worry about viscosity change, can put more attention on other printing problems, also can save the manpower. Stable ink viscosity reduce printing defects.

5. The pump frequency (hz) as control unit, ensure the precise of the control precision

6. The equipment of pipe for the ink, solvent is pneumatic control valve, more efficient, safe and reliable.

7. Simple way of equipment maintenance, as long as half a gallon of solvent and one minute of time, can complete cleaning equipment

8. Using large digital display, easy observation, operation set, easy to adjust

9. Use automatic lubrication and oil recycling system, extend the service life of the diaphragm pump 3 times

10. Ink hose using special material more soft, strong recovery, not deformation, not distention

11. Compact  structure, lightweight, easy to carry and install

12. Pneumatic diaphragm pump cycle ink is safe and reliable

Application:

1. Gravure printing and flexo printing: food package printing,plastic bag printing, PVC calico paper printing and all kinds of plastic package peinting.

2. Laminating: food plastic package laminating,paper laminating and rubber laminating

3. Coating: fit for bank card,negative,film,Polaroid,car decorating and all kinds of substrate coating.

4.Other use: all kinds of industry which is required for liquid viscosity consistency.

Technical parameters:

Power: 15 w

Ink circulation quantity: 10-15 l/min

Air pressure: 4-8 bar

Related Product 8

You maybe interest below product,click the headline to browse more...

Sucker For Pneumatic Diaphragm Pump BML-5	BML-5 Air Operated Single Diaphragm Pump	BML-10 Double Way Pneumatic Ink Pump Flexo
BML-15 Diaphram Pump	BML-20 3/4" Flexo Ink Pump For Printing Machine	BML-25 Pneumatic Fuel Pump

 

 

More product welcome to Visit our Website

 

→ RongtaiPacking