Contact Platform Support
Help CenterASTM D 3730 /GB/T 9264 Standard Sagging Tester For Paint
Related Products
-
Stainless Steel 4 Side Wet Film Applicator Effective Length 160mmUS$ 143 - 150MOQ: 1 Unit -
Ink ProoferUS$ 195 - 210MOQ: 1 Piece
-
Bending Testing Cylindrical Shaft Bending DeviceUS$ 385 - 407MOQ: 1 Set
-
(38um 76um) Stainless Steel Cube Film ApplicatorUS$ 95 - 104MOQ: 1 Unit
-
100cc/Ml Aluminum Material Density CupUS$ 67 - 72MOQ: 1 Piece
ASTM D 3730 /GB/T 9264 Standard Sagging Tester For Paint
Place of origin: China
Model Number: BGD 225
Specification: 50-275μm/250-475μm/450-675μm/650-875umd/ 850-1075μm
BGD 225 Sagging Tester produced by our company is in accordance with the specification of ASTM D 4400 and ASTM D 373. They are made of corrosion resistant stainless steel, the width of application is 75mm at 6mm per sagging thickness, and the gaps are being separated by a 1mm space as a marking on each sagging for distinctive identification of each sagging.
They are applicable to determine the relative sag resistance of a series of paints in order to provide the technical parameters for the paint application on site.
Main Technical Parameters
Clearance ranges:
Ordering information |
BGD 225/1 |
BGD 225/2 |
BGD 225/3 |
BGD 225/4 |
BGD 225/5 |
RANGE |
50-275μm |
250-475μm |
450-675μm |
650-875μm |
850-1,075μm |
1. Difference between adjacent two notches:25μm
2.Overall dimension:120×20×20mm(length by width by height)
3. The applicator can scrape 10 pcs of Parallel to the wet film in different thickness, the width of wet film is 6mm, space of each film is 1.5mm, thickness difference between adjacent film is 25μm
Manual:
Drawdown the coatings on a material(glass, test chart or board)using the appropriates sagging Thickness Gauges, then place the coated material at vertical position(90º)to the platform(eg: table).Allow 10 to 30 minutes(depending on the viscosity)for the coatings to sag under gravity. Check out the coating thickness without the sagging effect and the next coating thickness with the sagging effect. With that information, the recommended coating thickness is between the 2 layers of coatings.
|
|
|
Double Groove Hegman Fineness Gauge |
Use For Paint Four Side Wet Film Applicator | Stainless Steel 4 Side Wet Film Applicator Effective Length 160mm |
|
|
|
| Cube Film Applicator(38um 76um) | Hand Ink Proofer For Flexo Ink Tester |
Bending Testing Cylindrical Shaft Bending Device |
|
|
|
| Cross Cut Adhesion Tester For Paint | 50ml Stainless Steel Density Cup |
Single-groove Hegman Gauge
|
|
|
|
| Digital Display BGD186 Krebs Stormer Viscometer | RDS Scrape Ink Bar From United States | GB/T 1727-92 Standard AARON Scraping Ink Rod |
More product welcome to Visit our Website
→ RongtaiPacking
Send Inquiry to This Supplier
You May Also Like
-
Endress+Hauser E+H Compact Conductivity Device Smartec CLD18-BGGENegotiableMOQ: 1 Piece
-
Portable Precision Chilled Mirror Hygrometer SF6 Gas Trace Water Tester Dew Point AnalyzerUS$ 999 - 19999MOQ: 1 Set
-
Universal Testing MachineNegotiableMOQ: 2500 Pieces
-
Computer Control Hydraulic Universal Testing MachineNegotiableMOQ: 1 Set
-
Hydraulic Plastic Flange Connections Cover Plugs SHF SeriesUS$ 0.22 - 0.28MOQ: 2500 Pieces
-
Gates 550C 550U U550 U-550 U508 U-508 Japan Unitta U-550 Belt Tension Meter New U-508 Belt Tension Meter Upgraded Version U550US$ 1 - 900MOQ: 1 Piece
-
Vertical Rod Type Floor-type Electrostatic Discharge Tester / Electrostatic Discharge Device for Human BodyUS$ 20 - 93MOQ: 1 Piece
-
Analytical Balanace.scale ,weichengya Laboratory SupplierUS$ 10 - 35MOQ: 10 Sets
-
Smart MD-3051 Online Density Meter With 4-20mA OutputUS$ 2,380 - 2,500MOQ: 1 Unit
-
5W-300W Sun Simulator Watt Testing 30% Off / Xenon Lamp Sun Simulator Free Sent / Sun Simulator TestingUS$ 7,500 - 10,000MOQ: 1 Set
