MELAMINE PLYWOOD
Specifications
Melamine / MR glue plywood, mixed hardwood core veneer (acacia/ eucalyptus core), Canarium/ red face/ back- Melamine Plywood:
- High density wood with Melamine glue are used to manufacture of our Melamine plywood. It meet resistance requirement after immersion in boiling water for 8 hours up.
- Superior bond strength between veneer ply, virtually unaffected by moisture and dampness.
- It is ideally be used in exterior work, construction, kitchen, sofa frames.
- Specification :
Face |
Keruing/ Canarium/Bingator. |
Core |
100% dried, Acacia/eucalyptus wood, high density -hardwood |
Glue |
Melamine glue, flour powder |
Density |
600-650kg/cbm |
Length x width |
1220mmx2440mm |
Thickness |
8/8.5mm; 11/11.5mm; 14/14.5mm; 17/17.5mm; 18mm |
Send Inquiry to This Supplier
You May Also Like
-
PlywoodNegotiableMOQ: 2400 Pieces
-
Plywood Bent Bed SlatUS$ 400 - 600MOQ: 20 Cubic Meters
-
Poplar/hardwood/tung/combined Core Block BoardUS$ 200 - 300MOQ: 52 Cubic Meters
-
Small Wooden CubicUS$ 0.05 - 0.15MOQ: 1000 Pieces
-
Good Quality HDF Mould DoorskinUS$ 3.00 - 3.00MOQ: 3000 Pieces
-
Top Performance Plywood for Partition Wall Board DesignUS$ 1,000 - 50,000MOQ: 1 Set
-
Wood Relaxing ChairUS$ 8 - 10MOQ: 1 Piece
-
Okoume PlywoodUS$ 250 - 600MOQ: 20 Cubic Meters
-
Teak Plywood for Middle East/India MarketsUS$ 5 - 10MOQ: 3000 Sheets
-
Poplar Plywood Bed Slat for SaleUS$ 350 - 500MOQ: 5 Cubic Meters