China Professional Manufacture 15 mm Synthetic Grass for Tennis Professional Tennis Net
| SPECIFICATION | |
| Model: | G003 |
| Pile height: | 8-12MM |
| Gauge: | 5/32inch |
| Dtex: | 6500 |
| Yarn Type: | Fibrillated |
| Yarn Material: | PE |
| Stitches rate: | 24~32 stitches/10 CM |
| Density: | 62400 |
| Backing: | PP |
artificial turf model G003 , with CE certification , fibrillated grass yarn type and yarn material is PE . The backing material is PP+None woven. The pile heigh t , density , backing and Dtex are all as customer order.

Many different kinds backing , PP , PP+Nonewoven, PP+ net, net, PP+Nonewoven+net.
High duribility and elastisity, clean, soft, you could touch my your hand,walk on it and also sleeping on it. Far away from the noisy work city, enjoying yourself in the nature enviroment.

You could choose many different packing ways, in rolls by PP bag,in pieces by woden case, in small rolls by films,etcs.
Artificial Grass Installation
Installation
Learn how to design and build your very own artificial grass landscape.
Excavation and Base Construction
Remove old sod/dirt to a depth of 4″. Lay down landscape fabric over entire project area. Place 2″ of 3/4″ road base over entire area, rake evenly, water thoroughly and compact with plate tamper (compactor). Place another 2″ of ¾” road base over project area, rake evenly, water thoroughly, and compact. Be sure there are no low spots within the area of the Artificial Grass.
Surfacing
Lay artificial grass over project area. Preferably keep fibers facing same direction (never opposite direction).
Seaming
Cut off factory excess 2-4 tufts in. Try and line seams up as best as possible. If you have to, cut one piece of turf to the other getting the backing of both pieces as close as possible to one another without overlapping. Lay seam tape half under one piece and half under the other. Fold turf away from seam and pour glue. Spread glue evenly with glue spreader. Let glue get
tacky and lay pieces back down. Be careful not to bury any fibers or get glue on the fibers
.Put seam together like a zipper. Nail the seam every 4-6 inches on both sides with 4-5 inch galvanized spiral spikes. Be sure not to bury any fibers or create any indentations in the base.
Sand Filling
Empty sand bags into a wheel barrow. With a flat headed shovel spread the sand around as evenly as possible. One shovel head should do 2-3 linear feet. Use a rake, stiff bristled push broom or a power broom to drop the sand into the fibers. Run the chosen tool in the opposite direction that the fibers are laying and it will drop the sand in and stand the fibers up. Do another lighter “touch up layer” to thicken the sand in-fill and even it out at the same time. Get the fibers standing straight up so that there is no more direction to it.
Recommended Installation Tools
· Flat Head Shovel(s)
· Wheel Barrow
· Asphalt/Landscape Rake
· Exacto Knife
· Compactor (Plate tamper)
· Rake or Stiff Bristled Broom or Power Broom
Send Inquiry to This Supplier
You May Also Like
-
Light and Dark Green Two Colour Soccer/Football Artificial Grass Filled and Non-filled Styles With Good Quality Grass FiberNegotiableMOQ: 800 Square Meters
-
Grass Ball,hard Plastic Ball ,outdoor Sport BallUS$ 1.1 - 1.3MOQ: 1000 Units
-
ODOURLESS PET DOG PUPPY LITTER TRAINING TRAY POTTY TRAINER ARTIFICIAL GRASS PAD H0085US$ 6.99 - 8.99MOQ: 500 Pieces
-
Small YT-GM200P High Efficiency New Cheap Sand Spreading MachineUS$ 3,000 - 5,000MOQ: 1 Unit
-
Easy Installation Assemble Sports Floor for Indoor OutdoorUS$ 2 - 10MOQ: 10 Square Meters
-
Chia Cat GrassNegotiableMOQ: 1
-
Indoor Futsal Sports FlooringNegotiableMOQ: 5 Cartons
-
Acrylic Acid Indoor Basketball Court,basketball Courts for SaleNegotiableMOQ: 1000 Square Meters
-
Cricket PitchUS$ 500 - 1,300MOQ: 1 Set
-
Floating Floor Mats, Artificial Turf, Epdm Floor Mats, Plastic Court Construction, Artificial Turf for Football FieldsUS$ 15.23MOQ: 100 Square Meters









