Accessories for Artificial Grass Landscaping Installation u Nails ,pins
| Packaging Detail: | 4*25m/roll about 3000 sqms/20 container ,about 7000 sqms /40 container |
| Delivery Detail: | about 7-10 days |
| SPECIFICATION | |
| Model: | Z104 |
| Pile height: | 40MM |
| Gauge: | 3/8inch |
| Dtex: | 12500 |
| Yarn Type: | monofilament |
| Yarn Material: | PE+PP |
| Stitches rate: | 18 stitches/10 CM |
| Density: | 18900 |
| Backing: | PP + none woven cloth |
Description:
Artificial grass for landscape model Z104 , 4 colors with CE certification , monofilament grass yarn type and yarn material is PE . The backing material is PP+None woven . The pile height , density , backing and Dtex are all as customer order.
Description: Many different kinds backing, PP,PP+Nonewoven, PP+ net, net, PP+Nonewoven+net.
Description: High duribility and elastisity, clean, soft, you could touch my your hand,walk on it and also sleeping on it. Far away from the noisy work city, enjoying yourself in the nature enviroment.

Description: You could choose many different packing ways, in rolls by PP bag,in pieces by woden case, in small rolls by films,etcs.
|
Loading Quantity
| |
|
20 GP |
about 2200-2500 sqm |
|
40 GP |
about 4500-4600sqm |
40 HQ |
about 4600-5000sqm |
Installing Artificial Turf for Roof onto Concrete or Permanent Base
1. First of all assess how much artificial grass for landscape you will need. Note: We manufacture rolls in 2 widths: 2 metres(6 feet 6 inches) or 4 metres (13 feet 1 inch) .
2. Make sure that the surface to be covered is clean and smooth ready to receive the artificial grass for landscape. A self levelling compound available from any DIY store can remove surface imperfections that may show through to the top surface especially on thinner pile height products.
3. Lay the artificial grass for landscape to trim off to make that perfect edge ie in doorways or up a wall. Leave for around 2 to 3 hours to settle. This helps stop any wrinkling or creasing.
4. Cut and trim your artificial grass for landscape, using a sharp Stanley knife making sure are no gaps between walls and artificial grass for landscape .
5. Make the joins using the correct type of seaming tape and glue - only quality outdoor tape and glue should be used.
6. Apply the infill if required. Typically a sand mix will be used . Rake and spread the infill evenly, taking care not to over fill the surface. Note: Application of sand is best on a dry day. Remember that the infill will eventually compact so you should consider adding a final layer when settled.
7. If installing on to a wooden surface such as decking or suspended floors a combination of adhesive and artificial grass for landscape tacks can be used.
Send Inquiry to This Supplier
You May Also Like
-
Custom Lifelike Staute Samurai Armor Pvc Statue Shenzhen CompanyUS$ 1 - 30MOQ: 500 Pieces
-
Promotional Product Candy Can Plastic Hand FanUS$ 0.25 - 0.5MOQ: 1800 Pieces
-
Magnetic Small Plastic Flip Flops ForFunUS$ 0.1 - 0.5MOQ: 500 Pieces
-
PVC WristbandNegotiableMOQ: 1
-
Plastic Rattan Flower Vase With Wooden Linner.US$ 8 - 50MOQ: 500 Pieces
-
Item No.: STA4118 Craft Punch SetUS$ 6 - 6.5MOQ: 1000 Sets
-
23cm Artificial Grass BallUS$ 0.5 - 0.8MOQ: 1000 Sets
-
Monkey Monkey Doll Hanging New Gifts Resin Gifts Festive Ornaments TrumpetUS$ 0.5 - 2MOQ: 1000 Pieces
-
High Definition Map GlobeNegotiableMOQ: 1 Piece
-
Light up PHOTO FRAME SNOW DOMENegotiableMOQ: 5000 Boxes











