Contact Platform Support
Help CenterDrilling Sulfonated Phenolic Resin SMP-2
Related Products
-
Polyacrylamide Potassium Kpam Has Good Fluid LossUS$ 1,700 - 1,800MOQ: 1 Ton -
Thickener and Stabilizer in Borehole Drilling Fluid Used Polyacrylamide Potassium KPAMUS$ 1,700 - 1,800MOQ: 1 Ton
-
Drilling Fluids Polyacrylamide Potassium KPAM Acrylamide and Acrylic Acid CopolymersUS$ 1,700 - 1,800MOQ: 1 Ton
-
Drilling Fluids Polyacrylamide Potassium KPAMUS$ 1,700 - 1,800MOQ: 1 Ton
-
Acidification Mutual Solvent JHGUS$ 1,000 - 2,000MOQ: 1 Metric Ton
Drilling Sulfonated Phenolic Resin SMP-2
I. Description
SMP-2 is an anti-temperature-salt ultra-deep mud fluid loss agent, can reduce water loss of high salinity mud after high temperature (200 degrees Celsius), mud cake thick high and coefficient of friction, improved mud rheological properties, has fluid loss, sloughing, anti-card and anti-saturated brine variety of effects, and at the same time reducing water loss without increasing the viscosity of the slurry ,under high temperature conditions will not produce gelation.
II. Features
It is water-based drilling fluids can be directly used in almost compatible with all treatment agents,
200-220 degrees Celsius temperature resistance, salt resistance to Cl-: 100 thousand mg / L-- saturated brine.
to reduce high temperature and high pressure loss improved greatly improve high temperature mud cake quality, reduce cake friction coefficient.
III.Specification:
Item |
Index |
appearance |
powder |
Water insoluble matter,% |
≤ 12 |
Effective content,% |
≥ 80 |
Room temperature pressure filtration, ml |
≤ 15 |
After hot rolling at room temperature pressure filtration / ml |
≤ 20 |
IV. Recommended dosage
Typically dosage, depending on the bottomhole temperature, generally from 1.0 to 5.0 percent,
V. Packaging
25Kg triple composite /PE Bag, it can also be customized packaging.
Send Inquiry to This Supplier
You May Also Like
-
Food‑Grade Clarified Polypropylene PP Pellets SK Korea R370Y High Gloss for Transparent Food PackagingUS$ 1 - 1.02MOQ: 1 Kilogram
-
940NC Polycarbonate Raw Material, Flame Retardant V-0 Grade for Electrical ComponentsNegotiableMOQ: 1 Kilogram
-
BASF A3WG7 China Factory's PA66 Nylon & Carbon Fiber Powder Modified PA Pellet With Low-Resistance Conduction Grade Molding MaterialUS$ 2.9 - 3.5MOQ: 25 Kilograms
-
Polymers & ResinsNegotiableMOQ: 2000 Bags
-
Fluorocarbon Powder Coating & Epoxy Flake Floor Coating - Chemical Resistant SolutionsNegotiableMOQ: 500 Kilograms
-
Economic Interlocking Horse and Cow Stable Mat Made of Rubber or EVAUS$ 13.5 - 35.4MOQ: 100 Pieces
-
SAP Super Absorbent Polymer for Sanitary Napkins or DiapersUS$ 1.5 - 2MOQ: 1000 Kilograms
-
Slip Additive Masterbatch With PE CarrierUS$ 2.3 - 2.5MOQ: 500 Kilograms
-
UHMW PE Powder for Lead-acid Battery SeparatorUS$ 2,750 - 2,850MOQ: 1 Ton
-
Pet Flakes Hot Wash / Pet Flakes Chip / Hot Washed Pet FlakesUS$ 650 - 680MOQ: 22 Tons
