Contact Platform Support
Help CenterPolymer Emulsion Polyacrylamide for Oil Processing Wastewater Treatment
Related Products
-
Anionic/cationic Polyacrylamide/pam Flocculant Emulsion Cas: 9003-05-8US$ 1,000 - 2,500MOQ: 1 Metric Ton -
Polyacrylamide/pam/phpa Polymer Emulsion Used as Drilling Fluid in Oil FieldUS$ 1,000 - 2,500MOQ: 1 Metric Ton
-
Oilfield Fracturing Fluids Anionic Acrylic Polymer Apam EmulsionUS$ 1,000 - 1,300MOQ: 1 Metric Ton
-
Oilfield Fracturing Fast Dissolve Anionic Polyacrylamide EmulsionUS$ 1,000 - 1,300MOQ: 1 Metric Ton
-
Polymer Polyacrylate EmulsionUS$ 1,000 - 2,000MOQ: 1 Metric Ton
polymer emulsion polyacrylamide for oil processing wastewater treatment
Emulsion polyacrylamide
This product is our high level of efficiency liquid flocculants, using oil-in-water advanced technology, with the W / O emulsifier in oil from the polymerization medium, compared with conventional products, with instant, wide PH range and high charge stability, good flocculation effect, with less multi-functional characteristics.
Applications
Sewage treatment: urban sewage, industrial waste water, fruit and oil processing wastewater treatment sludge dewatering.
Oilfield applications: drilling mud coating agents; and surfactants, demulsifiers fit for oilfield operations oily wastewater.
Paper industry: the production of newsprint, fine paper, cardboard and other paper products, used as a retention aid.
Specifications
Type |
Viscosity(cps) |
Bulk Viscosity (cps) |
Solid Content(%) |
PH |
Dissolve Time (min) |
Anionic water-in-oil emulsion polyacrylamide |
3-9 |
<2000 |
30-50 |
5-8
|
5-10
|
Nonionic water-in-oil emulsion polyacrylamide |
3-6 |
<2000 |
35-50 |
5-8 |
5-10 |
Cationic water-in-oil emulsion polyacrylamide |
3-6 |
<2000 |
35-50 |
4-8 |
5-10 |
Benefits
(1) Economical to use-effective at low dosage levels
(2) Achieve high solids removal efficiencies
(3) Easily soluble in water, dissolves rapidly
(4) Liquid form for easier handling
(5) Exceptionally high molecular weight and broad cationic range
Handling and storage
Rubber gloves, goggles and protective clothing are recommended for use while handling these products. Recommended materials of construction include fibreglass reinforced plastic(FRP), high-density and/or cross linked polyethylene, glass or epoxy-lined vessels, Stainless steel is recommended for interim storage of neat polymer. Depending on environmental conditions and the length of time, corrosion of stainless steel is possible. Stainless steel, Teflon, Various plastics and rubbers are acceptable for pumps, seals and feed lines for both neat products and product solutions. Avoid natural rubber and Buna-N gasket as these tend to swell when placed in contact with neat polymer. Do not use iron, copper aluminium or brass. The shelf life of these products is 6 months when stored at temperatures between 5 and 30 °c. For best results avoid freezing. If the product freezes, thaw completely and mix prior to use.
Spilled polymer is very slippery and should be absorbed onto an inert material and collected prior to thoroughly flushing with water.
Product addition
Prior to initial use, the JSE200 series emulsion flocculants should be agitated thoroughly via a low speed(<475rpm) drum/IBC mixer or a recirculation pump to ensure uniformity. Recommended working solution are 0.5% concentration; however, stock solution can be prepared up to 1% via an automated make-up unit or on a batch basis. Solultions should be aged 30min for maximum effectiveness. High quality make up water should be used. Secondary dilution water can be added to the stock solution prior to the addition point to improve mixing with the substrate at a ratio up to 10:1. A distributing header or distribution ring is recommended in the treatment stream. Avoid centrifugal pumps for polymer transfer.
Package: The product is packed in 1200kg/IBC, or 250kg/drum
Storage: Store in room, dry and well-ventilated without direct sunshine, store temperature 5-30 °C.
Shelf life: 12 months.
High quality
Most competitive price
Quick delivery
Shandong Tongli Chemical Co., Ltd., located in Zibo City Huantai County, Shandong Province Shou Ji Road south, and convenient road transport, communication facilities and strategic location.
The company's main products are polyacrylamide (Anionic/Nonionic/Cationic) oilfield chemicals products, involving oil, water, mineral processing, building materials and other industries. Owned PetroChina, Sinopec, CNOOC level of network intelligence, products with high quality, high stability and high cost selling domestic drilling products applied 981 South China Sea drilling platform in 2014 , the establishment of an international trading company in 2013, exports many countries in Southeast Asia, South America, the Middle East and Europe, access to domestic and foreign customers praise.
Picture
1.Product
2.Factory
3.Equipment
5.Cetification
6.Exhibition
Send Inquiry to This Supplier
You May Also Like
-
Plastic Raw Material LCY SEBS Powder 7550UUS$ 1.2 - 1.5MOQ: 25 Kilograms
-
PC-1100u Polycarbonate PC Plastic Granules PC ResinUS$ 1.5 - 1.8MOQ: 25 Kilograms
-
Leandre Basel PP8623 Food Grade High Impact Lightweight Environmental Material PP Polypropylene Pellets PP H5416US$ 1.10 - 1.30MOQ: 1000 Kilograms
-
Low-Friction PTFE Powder for Automotive Bearing ManufacturingUS$ 10 - 30MOQ: 100 Kilograms
-
Economic Interlocking Horse and Cow Stable Mat Made of Rubber or EVAUS$ 13.5 - 35.4MOQ: 100 Pieces
-
SAP Super Absorbent Polymer for Sanitary Napkins or DiapersUS$ 1.5 - 2MOQ: 1000 Kilograms
-
Slip Additive Masterbatch With PE CarrierUS$ 2.3 - 2.5MOQ: 500 Kilograms
-
UHMW PE Powder for Lead-acid Battery SeparatorUS$ 2,750 - 2,850MOQ: 1 Ton
-
Pet Flakes Hot Wash / Pet Flakes Chip / Hot Washed Pet FlakesUS$ 650 - 680MOQ: 22 Tons
-
PP/ HDPE/ LLDPE VIRGIN & RECYCLED, PE, PPCNegotiableMOQ: 25 Metric Tons
