Circular Saw Blades for Wood Aluminium Acrylic Cutting

Circular Saw Blades for Wood Aluminium Acrylic Cutting 

The saw blade tips material widely use carbide, TCT and PCD for different purpose. There are saw blades for Wood, Metal, Acrylic, Plastic, Aluminum & More. Before buying saw blades, it’s good to brush up on your saw blade terminology to make sure you get what you need. This saw blade glossary defines the many different saw blade terms that you need to know when you purchase, or start working with saw blades.

Acrylic Saw Blades
This saw blade is used to cut acrylic & plastic materials.

Aluminum Saw Blades
The aluminum saw blade is used for cutting aluminum & other non-ferrous metals.

Carbide Tipped Circular Saw Blades
A saw blade with cutting edges (teeth) made from carbide. A circular saw blade is a metal disc with jagged teeth on the edge. The disk fits into a machine which causes it to spin. Used to cut wood and other materials.

Fine Cut-Off & Crosscut Saw Blades
Ideal for cutting materials with fragile surface layers such as plywood and laminate. The high tooth count yield smooth finishes.

Panel Saw Blades
A panel saw blade cuts melamine, plywood, aluminum, plastic and wood sheets into sized parts. Often used for cabinets & signs.

Plastic Cutting Saw Blades
This saw blade is used to cut acrylic & plastic materials.

Plywood / Laminate Saw Blades
These saw blade leaves a smooth, clean, chip-free finish on the top and bottom edges of plywood and laminates.

Scoring Saw Blade
A scoring saw blade is used on panel saws with separate scoring units for chip-free cuts on both sides of the material.

Ripping Blade
For cutting parallel to the wood grain. This blade has fewer teeth and a large gullet.

Wood Cutting/Ripping TCT Circular Saw Blade
Ultra Thin Kerf Wood Ripping TCT Circular Saw Blade with Rakers/Wipers
Wood cutting/ Scoring TCT Circular Saw Blade